It's a mess. I have the A1 with AMS and it takes way more space than I wanted. The coreX with AMS are way more compact.
Edit.
Wide 80cm (with the poop chute on the left and the AMS on the right)
Depth 70cm (with all the cables and the bed going back and forth)
Height 60cm with the top roll
It needs 70 cm of depth?! Damn, I don't have room for that. I'll have to rethink this.
The bed goes back and forth. On the back, you need the place since there is the infamous cable that should not be torn. On the front, the bed can go over the void. There is no need for a 70 cm large table, maybe 50cm with overhang.
I understand the mechanics, I just didn't consider the clearance needed to accommodate the moving bed. I don't want to burden you with a task, but I'm planning to put this in my small office which already has a lot of shit in it and I want to be sure. Can you tell me how much clearance I'd need behind the static footprint? Like if I get a table deep enough to fit the base, I'll want to consider how far from the wall it'll need to be.
I just measured it and the overhang behind is half the bed and half the infamous cable. You need around 60cm between the front feet and the wall behind, for the cable not to be torn when the bed is all the way to the back.
22 cm wide? This graphic for the A1 Mini says the whole setup is 60 cm. Minus the 38 cm mini would mean it's 22 yeah?
You can also mount the AMS on the top bar of the A1
That sound like it would wobble and easily tip over, no?
I top-mounted it to my A1-mini and it does just fine. I'd imagine the full A1 should be alright.
It's a wobbly affair but it does work and Bambu does offer it as an option with a mounting bracket you can print. I.. just put my AMS to the side because my table is already kinda scuffed :D
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io
There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
