14
Foam mod and battery - can I cover the battery?
(discuss.tchncs.de)
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
this post was submitted on 22 Jul 2023
14 points (93.8% liked)
Mechanical Keyboards
8817 readers
9 users here now
Are you addicted to the clicking sounds of your beautiful and impressive mechanical keyboard?
If so, this community is for you!
Here you can discuss everything about mechanical keyboards (and only mechanical keyboards).
Banner by Jay Zhang on Unsplash
founded 4 years ago
It'll be fine. Keyboards without any lights use very little power so the battery won't get warm during use.
The keyboard I'm modding has RGB, so I guess I should cut around it?
how many hours does the battery last?
continuing my above answer: your cell should be a cheap 1C (which is just cheaper than the 3+C, not bad, it’s totally fine for your application) The C rating means “the max amperage you can draw from the battery to be safe is times ”. So a 1C 2000mAh battery has max amp draw of 2A (or 2000mA) while a 2C 500mAh has 1A (2x500mA)
If your battery lasts for more than 10 hours straight that means you draw 1/10th of max amp - meaning a cool battery. In case of a 1C 2000mAh you draw 200mA
So: if your keeb lasts more than 10-15 hours you’re more probably fine as the battery is kept cool
Wow, thanks for the thorough explanation! I have a Keychron K2 V2, so it should be 4000mAh as per the website.
pffft there’s no way you draw even near enough battery to even notice any temperature change
Cool thanks for easing my mind!