How do I run power to a USB-C powered sensor? (lemmy.nz)

submitted 4 months ago* (last edited 4 months ago) by Dave@lemmy.nz to c/homeassistant@lemmy.world

9 comments fedilink hide all child comments

I'm just bought an Airgradient air quality sensor (actually two, an indoor and an outdoor).

I want to mount the outdoor one but it needs a USB-C power supply. I can run a cable but power isn't exactly close. Do I somehow find a 10m USB-C cable and run it through the roof to the sensor that I mount on the side of the house? What's a normal way of getting USB-C power to an area far away from the closest power point?

you are viewing a single comment's thread
view the rest of the comments

[-] slazer2au@lemmy.world 1 points 4 months ago

Honestly, I would run a normal power cord out there and mount the power point and power converter into an outdoor enclosure.

That way in the future if you change the unit you have a 240/110 outlet there for whatever you need.

this post was submitted on 17 Oct 2025

2 points (100.0% liked)

homeassistant

18492 readers

2 users here now

Home Assistant is open source home automation that puts local control and privacy first.
Powered by a worldwide community of tinkerers and DIY enthusiasts.

Home Assistant can be self-installed on ProxMox, Raspberry Pi, or even purchased pre-installed: Home Assistant: Installation

Discussion of Home-Assistant adjacent topics is absolutely fine, within reason.
If you're not sure, DM @GreatAlbatross@feddit.uk

founded 2 years ago

MODERATORS

GreatAlbatross@feddit.uk

greatalbatross@lemmy.world