9
Installed Sprite Extruder Pro kit and Ender v2 Intelligent display, but both won't work properly (lemmy.ml)
submitted 1 year ago* (last edited 1 year ago) by ReakDuck@lemmy.ml to c/3dprinting@lemmy.ml
6 comments fedilink hide all child comments

I own the Ender 3 Pro BUT, I have the silent motherboard 32-bit and installed with the firmware: "Ender-3 Pro_HW4.2.7_SW2.0.9.03_SpritExt_H300" because it seems like its the only one meant for the extruder pro kit. It complains that the BL-Touch is not attach to it. I can see it in Octoprint error message and gcode terminal.

With the default firmware on it, it did manage to start the print till its heated to 228°C, but Octoprint couldn't proceed after the printer heated. It just waited till infinity.

Additionally the Display is not working at all, its beeping and mid beeping a louder beep is repeating every second. Not sure why, but the display claims to support Ender 3 Pro, Ender 3 and Ender 3 v2.

More Sources:

What firmware would be the correct one for the extruder? Should I return the Display?

Silent Mainboard did work with the stock-extruder. It stopped working with Octoprint after replacing the extruder with the new one, but seems to heat and move correctly.

you are viewing a single comment's thread
view the rest of the comments
[-] tenzen@lemmy.ca 1 points 1 year ago* (last edited 1 year ago)

I've installed the sprite pro on my ender 3 max. To get it going I compiled my own firmware and found that TH3D's firmware was simple and worked well.

https://www.th3dstudio.com/

Although it wasn't long and I added an rpi and installed Klipper.

For the bltouch, I didn't really spend time on it. The connector to the included board on the extruder didn't work - - I ran my own wire directly to the main board. Likely user error, but it's working so I stopped trying to fix it.

Hope this helps.

this post was submitted on 29 Aug 2023
9 points (100.0% liked)

3D Printing

4371 readers
1 users here now

For everyhting 3D printing related.

Please be excellent to each other :)

Icon by Freepik, Banner photo by Thiago Medeiros Araujo

founded 4 years ago
MODERATORS
3dnudel@lemmy.ml