I made a kernel module for overclocking USB devices (gamepads, mice, etc.) (lemmy.ml)

submitted 4 days ago by p0358@lemmy.blahaj.zone to c/linux_gaming@lemmy.ml

5 comments fedilink hide all child comments

cross-posted from: https://lemmy.blahaj.zone/post/38617525

This DKMS module allows you to overclock some USB devices by overriding their endpoints' bInterval values in the device descriptors – if the device physically allows you to poll it at higher frequency and will give you more data.

Back on Windows this (with the same method) was rather trivial using the "hidusbf" program. And ever since moving to Linux I was pretty annoyed I didn't have a similarly simple enough way of doing the same thing. So basically I guess I had no choice but to make one.

And the module allows doing that for theoretically any USB device without patching and re-compiling the kernel. Installation instructions are in the README (there's .deb, .rpm and AUR packages):

https://github.com/p0358/usb_oc-dkms

So let me know what you think, and if you managed to overclock any gamepads or other devices, or want to try.

you are viewing a single comment's thread
view the rest of the comments

[-] ace_garp@lemmy.world 2 points 3 days ago

Thanks for the insight.

AFAIK the USB-C port can not be used for wired connection.

The MX master seems to be internally hobbled at 125Hz(would love to be proved wrong on this). Online mouse-polling check-sites show it polling at around 120-130Hz.

I'll keep my previous Rival 300 plugged in, and switch to it where necessary. (Also just found out about rivalcfg to try and get some more tweaks from that mouse.)

Thanks for your work on this project. I'll keep playing around with it.

this post was submitted on 15 Feb 2026

67 points (100.0% liked)

Linux Gaming

21730 readers

1 users here now

Gaming on the GNU/Linux operating system.