88
US bans any new consumer-grade routers not made in America
(www.theregister.com)
A nice place to discuss rumors, happenings, innovations, and challenges in the technology sphere. We also welcome discussions on the intersections of technology and society. If it’s technological news or discussion of technology, it probably belongs here.
Remember the overriding ethos on Beehaw: Be(e) Nice. Each user you encounter here is a person, and should be treated with kindness (even if they’re wrong, or use a Linux distro you don’t like). Personal attacks will not be tolerated.
Subcommunities on Beehaw:
This community's icon was made by Aaron Schneider, under the CC-BY-NC-SA 4.0 license.
I think you actually need 3.
Otherwise there is no real "routing" just "in here, out there" and vice versa.
The "routing" can still refer to routing to devices attached via a switch. So no need for a third port to qualify as a router.
That's true. I forgot about a down network switch.
Technically you only need 1 interface when using VLANs. Basically any device with a CPU and NIC can be a router.
It's a router if it operates on layer 3. Most WiFi routers only use two interfaces (ISP side and WiFi) and yet they are routers. They also provide a layer 3 firewall.
But several devices can connect to the WiFi side.
Counts as multiple endpoint devices.
Same with Ethernet
You would be correct for a switch only, but not a router (serving multiple VLANS and/or hosts via a trunk port connected to a single switch or WAP). https://en.wikipedia.org/wiki/Trunking