25
Best method for dual filament
(midwest.social)
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
this post was submitted on 04 Sep 2023
25 points (96.3% liked)
3DPrinting
15548 readers
115 users here now
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io
There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml
Rules
-
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
-
Be respectful, especially when disagreeing. Everyone should feel welcome here.
-
No porn (NSFW prints are acceptable but must be marked NSFW)
-
No Ads / Spamming / Guerrilla Marketing
-
Do not create links to reddit
-
If you see an issue please flag it
-
No guns
-
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
founded 1 year ago
MODERATORS
2 shouldn't have a problem with oozing or cooking since the second filament is not in the hot area.
2 is mixing hotends. What you describe is 3 (y-splitter with the splitting integrated into the heat sink). They suffer basically the same issues like an "external" y-splitter. You can get them to work but changing materials requires you to do all of the painful setup/calibration once more.
.
That they don't have oozing issues is correct but I never mentioned this in the first place.
.
The main issue with 2 (mixing) is cooking the filament and slicers aren't great at this (operational challenge). There are more pro and cons but I think in the end it boils down to two applications: 1. cheap to integrate. 2. While they are advertised as mixing hotend the result is on pair with dual color/extrusion filament.
No offense, but I made the list and didn't include mixing hot ends.