599
Anon is incompatible
(sh.itjust.works)
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
this post was submitted on 02 Jun 2026
599 points (96.4% liked)
Greentext
8303 readers
612 users here now
This is a place to share greentexts and witness the confounding life of Anon. If you're new to the Greentext community, think of it as a sort of zoo with Anon as the main attraction.
Be warned:
- Anon is often crazy.
- Anon is often depressed.
- Anon frequently shares thoughts that are immature, offensive, or incomprehensible.
If you find yourself getting angry (or god forbid, agreeing) with something Anon has said, you might be doing it wrong.
founded 2 years ago
MODERATORS
If I'm in a situation where it's Apple or failure, I will gladly fail.
They have a lot of nerve using a USB standard that's only 12 years old
USB-A is the common standard. Most devices are made with USB-A compatibility. Most portable media are USB-A.
I'm not even going after the vast majority of my hard stops when I pick technology, like the fact that there's no proper (S)VGA and no full-size DisplayPort (and I mean proper DisplayPort, not an "HDMI" plug into a DisplayPort interface), or the lack of a hardware switch to fully disable power to all onboard radio and modem devices.
Well, per spec the client devices are supposed to have B ports (e.g. printers, scanners, external hard drives, etc. are all B), thumb stick are outliers in that they use A.
Well they used to at least, all the ones I've seen recently are A/C. A is legacy at this point.
They had female B ports and you usually connected them to the PC with a male B to male A cable.
Thumbstics forego the cable for easo of carrying so they provide what the cable would, USB A male for the host.
So mad that my modern laptop doesn't have a DIMM port, how am I supposed to use my 1992 era keyboard?
You mean DIN, not DIMM. DIMM is RAM. DIN is PS/2 and others. As far as how I use my old boards and trackballs, PS/2 to USB-A 1.0.