9

Hi all,

I'm hoping for some troubleshooting tips. I have a self-build split keyboard using Blackpills.

If I flash either side with 'SPLIT_KEYBOARD = no' in my rules.mk, then both sides work fine (but both working as the left side). If however I set 'SPLIT_KEYBOARD = yes', then both sides stop working.

It's driving me insane!

These are the relevant details of rules.mk:

MCU = STM32F401
BOOTLOADER = stm32-dfu
SPLIT_KEYBOARD = yes
SERIAL_DRIVER = usart

And config.h:

#pragma once
#define HAL_USE_SERIAL TRUE
#define SOFT_SERIAL_PIN A12
#define MASTER_LEFT
#define MATRIX_ROWS 6
#define MATRIX_COLS 6
#define SERIAL_USART_DRIVER SD1
#define SERIAL_USART_TX_PAL_MODE 7

And halconf.h:

#pragma once
#define SERIAL_USB_BUFFERS_SIZE 256
#include_next 

And mcuconf.h:

#pragma once
#include_next 
#undef STM32_SERIAL_USE_USART1
#define STM32_SERIAL_USE_USART1 TRUE

Please help! I've been at this for two days.

you are viewing a single comment's thread
view the rest of the comments
[-] idaida87@lemmy.world 2 points 1 year ago

Wasted your time there, didn't mean to. Noticed this in the QMK docs Some controllers (e.g. Blackpill with DFU compatible bootloader) will need to be flashed with handedness bootloader parameter every time because it is not retained between flashes. I understand that you define it by MASTER_LEFT because you have connected the USB on the left half, and that "notice" text is relevant to another way of defining the handedness. But maybe it's a specific Blackpill thing.

[-] nydas@lemmy.world 2 points 1 year ago

Ah, thank you. I’ll have a go at that then.

this post was submitted on 12 Nov 2023
9 points (100.0% liked)

Mechanical Keyboards

8873 readers
87 users here now

Are you addicted to the clicking sounds of your beautiful and impressive mechanical keyboard?
If so, this community is for you!

Here you can discuss everything about mechanical keyboards (and only mechanical keyboards).

Banner by Jay Zhang on Unsplash

founded 4 years ago