hey all. I've tried different ram, a different windows version, I've messed around in bios and updated it as well. How can i get my pc to register the rest of my ram??
-cross posting-
A nice place to discuss rumors, happenings, innovations, and challenges in the technology sphere. We also welcome discussions on the intersections of technology and society. If it’s technological news or discussion of technology, it probably belongs here.
Remember the overriding ethos on Beehaw: Be(e) Nice. Each user you encounter here is a person, and should be treated with kindness (even if they’re wrong, or use a Linux distro you don’t like). Personal attacks will not be tolerated.
Subcommunities on Beehaw:
This community's icon was made by Aaron Schneider, under the CC-BY-NC-SA 4.0 license.
Okay, I'm back and I have slept. Have a look at your CPU. I'm 90% sure that's where the problem was when I had this issue. I think in my case, one of the pins was slightly bent, and once it was very carefully straightened, the problem went away. But it could also be just not seated properly, or is overheating, or has dust on it.
OP try this one! Please!
Tried but did not work unfortunately
I saw in another post that you borrowed your partner's RAM. Is it possible for you to borrow their CPU (assuming it's compatible with your mobo)? If all the RAM is usable when you're using their CPU, that would point to your CPU having an issue, as there is the potential for a failure there that's not visible to the naked eye. If the problem still happens with your partner's CPU, then at least you've eliminated one possibility, which is useful for diagnostic purposes.
I'm inclined to agree that the CPU might have been set incorrectly / have a bad pin, especially after the black screen and BIOS errors after updating.
Unfortunate, but it happens to the best of us.