69
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
this post was submitted on 09 Dec 2023
69 points (100.0% liked)
Technology
37720 readers
448 users here now
A nice place to discuss rumors, happenings, innovations, and challenges in the technology sphere. We also welcome discussions on the intersections of technology and society. If it’s technological news or discussion of technology, it probably belongs here.
Remember the overriding ethos on Beehaw: Be(e) Nice. Each user you encounter here is a person, and should be treated with kindness (even if they’re wrong, or use a Linux distro you don’t like). Personal attacks will not be tolerated.
Subcommunities on Beehaw:
This community's icon was made by Aaron Schneider, under the CC-BY-NC-SA 4.0 license.
founded 2 years ago
MODERATORS
To my layman's understanding (which is not good) it's because of electronic resonance. In other words, how cables can give off/pick up radio waves.
In early radio, this was a problem with microphones picking up signal from radio transmissions, which obviously is unwanted when you're trying to have people hear your voice, and not your voice mixed with competing radio signals.
From what I understand, when it comes to microphones, there is a "hot" a "ground" and a "cold", and the cold is the same signal as the hot but inverted, and apparently this helps prevent picking up radio signals. It is called "balanced," and I'm not sure why other than the inverted signals. So while it looks like a standard stereo cable with three connections, it's apparently actually a standard microphone cable.
There's a lot more radio/electric wizardry going on than that, but that's my understanding of it, as a person who thinks Electricians are real life Wizards. This is based on some cursory internet research, so please anyone with more understanding correct me if I am wrong.
Is this better than a normal 4 contact jack without the cold?
"Cold" suggests you're thinking of balanced signalling. You don't have any balanced options with standard headphones and computer PC jacks, everything is unbalanced. Both the 4-connector (TRRS) and 2x3-connector (TRS) variants of your headphone connectors are unbalanced audio.
There might be a difference in crosstalk between the speaker and mic wires (ie signals going to your speakers leaking through the wire insulation and into the mic wires), but it should be inaudible if the cables and headset are designed correctly.