8
Appliance feature request: clothes dryer intake ports (lemmy.world)
submitted 10 months ago by lettruthout@lemmy.world to c/frugal@lemmy.world
9 comments fedilink hide all child comments

So each clothes dryer appliance has an exit port. You connect a hose to it to vent the damp air to the outside.

I want all dryers to have an intake port so that I can use cold air from the outside for drying. This will keep me from using (expensive) warm air from the inside of my house.

I suspect this will also make the dryer more efficient because the cold incoming air could contain less humidity.

you are viewing a single comment's thread
view the rest of the comments
[-] lettruthout@lemmy.world 1 points 10 months ago

That's interesting technology. 'Will seriously consider this when replacing this gas dryer. It only gets used for smalls (we use a clothes line for everything else) so is still in good shape after many years. We're reducing the amount of gas we use so it's going to be replaced at some point because of that.

[-] evranch@lemmy.ca 2 points 10 months ago

This is effectively what my parents do, with a dehumidifier in the basement where they hang their laundry.

They pre-spin them in in the gas drier for 10min to shake out wrinkles and heat the water in the clothes, then hang dry in the basement beside the dehumidifier.

A dehumidifier extracts the heat of condensation from water vapour, which is much greater than the amount of energy you would get by simply pumping heat from the outdoor air. That heat warms the basement which helps heat the house as well as dry the clothes further.

They live in a rainy climate so line drying is unfeasible and the basement needs dehumidification anyways, so it's a win-win.

this post was submitted on 06 Jan 2024
8 points (75.0% liked)

Frugal

5031 readers
1 users here now

Discuss how to save money.

founded 1 year ago
MODERATORS
RarePepeCollector@lemmy.world