Advice on first 3D printer (lemmy.dbzer0.com)

submitted 9 months ago by JollyTreecko@lemmy.dbzer0.com to c/3dprinting@lemmy.world

34 comments fedilink hide all child comments

I am looking to purchase a 3D printer as a hobbyist, not for any commercial use. I have limited options with local 3D printers but that's good as they're mostly cheaper low end printers so I can look at them thoroughly.

When I'm comparing the different 3D printers I'm mainly looking at the following: Cost, nozzle diameter, layer height, volume, and viable filaments.

My question is, is there anything else I'm missing? Are there important things I should be considering or avoiding?

Different printers have different resolutions but for my purposes it looks like they're all highly accurate and way past what I need. Not worried about speed either. They all mention bed and nozzle temperatures but I assume they are all within the necessary range for the filaments they allow right? So does it matter?

Also, any advice for maintenance? How to make it last as long as possible any mistakes I should be wary of. Thanks.

you are viewing a single comment's thread
view the rest of the comments

[-] rikudou@lemmings.world 4 points 9 months ago

Check whether they mention heated bed. And if they do, check the max temperature. For example PETG prints the best at 85-90°C for the bed. For example the A1 sounds really great with all the specs, but the maximum bed temperature of 100°C immediately disqualifies it for me.

90-100°C is the sweet spot I'd go for a cheap printer. Otherwise you're basically down to only printing PLA.

[-] IMALlama@lemmy.world 3 points 9 months ago

Totally agree on making sure it has a heated bed. That's said in my experience 85-90 is a smoking hot bed for PETG. On my unenclosed i3 clone I would run 75. On my enclosed Voron I run 70.

[-] rikudou@lemmings.world 1 points 9 months ago

I'm going off information from Prusa knowledge base:

Recommended bed temperature: 85 °C for the first layer, 90 °C for the other layers

Source: https://help.prusa3d.com/article/petg_2059

[-] IMALlama@lemmy.world 1 points 9 months ago

This is fair. I ran into all kinds of quality issues with my bed that hot. The glass temperature of PETG is 85 C.

this post was submitted on 11 Feb 2024

28 points (93.8% liked)

3DPrinting

15590 readers

48 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io

There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml

Rules

No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts

If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 1 year ago

MODERATORS

andypiper@lemmy.world

henry_rowengartner@lemmy.world

j4k3@lemmy.world

GrayBackgroundMusic@lemm.ee