19
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
this post was submitted on 22 Feb 2024
19 points (91.3% liked)
homeassistant
11921 readers
6 users here now
Home Assistant is open source home automation that puts local control and privacy first. Powered by a worldwide community of tinkerers and DIY enthusiasts. Perfect to run on a Raspberry Pi or a local server. Available for free at home-assistant.io
founded 1 year ago
MODERATORS
Is it common for apartments to have shared extractor ducts? I've never heard of a setup like this before, and it sounds like both a pain in the arse and a potential safety issue.
Controlling the kitchen fan is probably the easier bit. Depending on the design of the hood, you might be able to control it with a smart outlet or relay. Turn the hood's switch to always on and control it with the relay. The difficult bit would be sensing when to turn it on.
Cooking will often produce VOCs, and VOC sensors are easy to obtain, but they are also have other sources that are likely in your own apartment. Maybe try using temperature and humidity sensors int the duct to activate the fan when there is elevated temperature and humidity inside the duct?
No, but happens in crap countries like Croatia. Its sad, but I have to deal with it.
Turning on hood with relay like that would make it difficult to use when we are cooking (cant set the speed and need some kind of switch available). I was thinking I should solder relay on lowest speed, but that might cause additional issues.
Temp and humidity might work, but im not completely sure since its quite small amount of air coming trought. I should probably get some sensor and see output
my apartment in the US doesn't even have a vent to the outside. It just blows the exhaust through a filter and back into the room