824
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
this post was submitted on 06 Apr 2024
824 points (98.5% liked)
science
14595 readers
458 users here now
A community to post scientific articles, news, and civil discussion.
rule #1: be kind
<--- rules currently under construction, see current pinned post.
2024-11-11
founded 1 year ago
MODERATORS
It's moreso keeping it contained at those temperatures, so that it does not melt the container that it's in, and potentially explode.
There has to be some absolute next-level power backup to keep the containment field from failing.
Melting actually is not a seriously issue as while the plasma is very hot, it also has very little mass. Sparks are also ludicrously hot but with their little mass contain very little energy so pretty much anything but dry tinder is going to extinguish them before they can do any damage. You want to avoid loss of containment because you will have to clean the reactor vessel and maybe replace a couple of wall tiles but that kind of failure is far from catastrophic.
Though of course with current designs the reactor walls do get hot because that's how we intend to capture the energy: Pipe water through the walls to cool them, use the hot water to drive a couple of turbines. One of the holy grails to pine for after the current designs actually enter service is to look at ways to drive electrons in a wire directly from the plasma, no detour via heat. The other is aneutronic fusion.
That's actually really interesting, as I never heard of that before.
Yeah you're absolutely right, damn that'd be one hell of a Holy Grail touchdown moment for Humanity if we could pull that off, the direct transference, no "middle man".
From the link (for others like me and did not know what the word meant)...
I mean, in principle we can already do it: Fusion reactions tend to produce lots of electromagnetic radiation, and we can drive wires directly via electromagnetic radiation, the technology is called solar panels. Trouble being solar panels generally aren't good at absorbing X-rays.
Read the below from this article...
That's not the plasma that melts anything but neutron bombardment. The containment and fizzling out issue is the same whether the plasma produces neutrons or just tons of EM radiation which is what I focussed on.
That sturdiness of the cladding things is an important factor when it comes to making cost-effective reactors, that is, the price you sell electricity for needs to cover replacement parts, but is not really that much of an issue when it comes to achieving fusion the materials we have are sufficient for that. Proxima Fusion (the Max Planck spinout) is working on those economical issues for their commercial prototype (early 2030), it remains to be seen whether they go for durable and expensive or cheap but needs to be replaced more often. Which isn't unusual for power plants in general, none of them run 24/7 they get shut down for maintenance once in a while.
I'm aware (I read the article, including the part I quoted you), but regardless of the source of the melting, there is a melting issue of the containment vessel that needs to be engineered away.
Yes, and you won't get me to argue here. I'm too experienced a smart-Alec to contradict another smart-Alec :)
Well I'll take smart alec over being called pedantic any day.
Having said that, sincerely wasn't looking for the argument, just a matter of going back to my original point, that you corrected and educated me on.
I knew there was some kind of melting issue, when I had made my original comment. I had just assumed it was the plasma, but it ended up not being that, as you noted.
My follow-up link comment was just to say "Hey look there is a valid reason for melting to happen, I wasn't imagining it".
All's good on my end.