Did I Buy a Burned Out CPU? (lemmy.world)

submitted 3 months ago by pech@lemmy.world to c/buildapc@lemmy.world

6 comments fedilink hide all child comments

Hey all,

I took a gamble on a "for parts" 5800x3d that had a few bent pins. I currently have a 5600x with an ASUS TUF x570-Plus WiFi and thought this would be a nice upgrade.

The problem I'm seeing, is that the system won't post with the 5800 and hangs with the orange/yellow DRAM LED on the motherboard.

I thought to update the BIOS with the old CPU, but I already had a version that would support the new one. After that, I tried swapping RAM modules and only using one, then the other. Eventually I updated the BIOS to the most recent version and resetting with the jumper, but it still won't post.

Looking at the pin layout and considering the bent pins were all in one corner, I am wondering if the original owner tried to install this CPU rotated 90° and delivered some high power where it shouldn't've gone.

Any fun ideas, or did I just pay for a nice learning experience?

you are viewing a single comment's thread
view the rest of the comments

[-] Alexstarfire@lemmy.world 2 points 3 months ago

Sounds like you paid for a learning experience. If you bent the pound back, got it to fit in the socket, and it doesn't work then there's not really anything else to do. This is assuming your MB actually supports the CPU.

[-] swayevenly@lemm.ee 1 points 3 months ago

Just checked Asus' support page and it does. Oddly enough, it lacks information on what RAM it supports.

this post was submitted on 25 May 2024

2 points (100.0% liked)

Buildapc

3699 readers

27 users here now

founded 1 year ago

MODERATORS

Lemmenmo@lemmy.world