19
Seeking advice choosing a multi-color printer (sh.itjust.works)
submitted 6 months ago by capably8341@sh.itjust.works to c/3dprinting@lemmy.world
17 comments fedilink hide all child comments

Hello,

I am trying to figure out which printer with multi-color capabilities to buy, and I'd like to hear some other people's opinions.

Note: I can't buy Bambu Labs products, so please do not recommend one.

Current options:

  • Prusa Mk4 and MMU3.
  • Voron 2.4-style (either Formbot kit or Sovol SV08) and ERCF, and eventually DAKSH toolchanger.
  • Ratrig V4 and the upgrades when they come out.
  • Creality K2 Plus (when it comes out).
  • Qidi Q1 Pro and the rumored multi-color unit.

My current thoughts:

  • I am happy wait a bit if that's the best option.
  • I like the fact that the MMU3 mechinism doesn't waste as much filament as some other mechanisms. It's easier for me to pay more up front for the mechanism than constantly keeping tons extra filament in stock.
  • The potential for a Voron to be upgraded to a toolchanger with DAKSH is intising.
  • High print quality is important to me, although I can't imagine any of these would result in bad quality.
  • Prusa XL is outside my budget :(

Please let me know your opinions, and thank you to anybody who read this far.

you are viewing a single comment's thread
view the rest of the comments
[-] capably8341@sh.itjust.works 2 points 6 months ago

Admittedly, I bought it used. However, it had very little use and was a prebuilt model. I'd be surprised if that has much to do with the issues I've had since I didn't have any issues the first month or so.

The issues I've had have been all over the place from fans breaking, to having to reflash the RasPi I put in it, to it digging the nozzle into the build plate and ruining it. At one point, the print lifted off the build plate and clumped up to the point I had to replace most of the hotend, although that could happen on any printer I guess.

I think I'm leaning towards a Voron kit. Self-sourcing sounds awful.

this post was submitted on 05 Jun 2024
19 points (100.0% liked)

3DPrinting

15784 readers
45 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: or !functionalprint@fedia.io

There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml

Rules

If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 2 years ago
MODERATORS
andypiper@lemmy.world
henry_rowengartner@lemmy.world
j4k3@lemmy.world
GrayBackgroundMusic@lemm.ee