UPDATE 10/4 6:47 EDT
I have been going through all the comments. THANKS!!!!!! I did not know about the techniques listed, so they are extremely helpful. Sorry for the slow update. As I mentioned below, I got behind with this yesterday so work cut into my evening.
I ran a port scan. The first syntax, -p, brought no joy. The nmap software itself suggested changing to -Pn. That brought an interesting response:
nmap -Pn 1-9999
Starting Nmap 7.93 ( https://nmap.org ) at 2024-10-04 11:44 BST
Failed to resolve "1-9999". Nmap scan report for Host is up (0.070s latency). All 1000 scanned ports on 192.168.0.46 are in ignored states. Not shown: 990 filtered tcp ports (no-response), 10 filtered tcp ports (host-unreach) Nmap done: 1 IP address (1 host up) scanned in 6.03 seconds Just to be absolutely sure, I turned off my work computer (the only windows box on my network) and reran the same syntax with the same results.
As I read this, there is definitely something on my network running windows that is not showing up on the DHCP.
UPDATE 10/6
I am working through all these suggestions. I am sorry for the slow responses, but I have my hands full with family weekend. I will post more next tomorrow. But I did do one thing that has me scratching my head and wondering if this may be a wild goose chase.
I ran the nmap again per below with a completely fictional IP address within my normal range. It gave the exact same results:
nmap -A -T4 -p- -Pn
Starting Nmap 7.93 ( https://nmap.org ) at 2024-10-05 13:36 BST Nmap scan report for
Host is up (0.054s latency).
All 65535 scanned ports on are in ignored states.
Not shown: 65525 filtered tcp ports (no-response), 10 filtered tcp ports (host-unreach)
Service detection performed. Please report any incorrect results at https://nmap.org/submit/ .
Nmap done: 1 IP address (1 host up) scanned in 182.18 seconds
So, as others have saId this is just an unconfigured IIS server, which implies it's either a windows machine, or a windows based VM, well or someone put the default IIS files on another server, but that's unlikely.
When you say "weird" IP I'd wonder what you mean by that.
I think since it's probably a windows machine, from another windows machine typing nbtstat -A <ip> should give you the computer name and workgroup or domain they belong to. See if it matches anything you expect on your network.
If not, maybe it's time to change your WPA wifi key.
At least get WPA2
I don't even think my current wifi kit has WPA (1) as an option. It's WPA2 or 3 only I'm pretty sure.
Thanks. I ran nbtstat and it came up empty.
Edit: Also, I am big on wired networks. I mostly save WI-FI for smart and mobile devices. There is a lot of stuff on Ethernet that does not need a password.
Hmm. That would mean it's likely one of the following (well perhaps more options, but these spring to mind)
I think you suggested in another comment, that it's not in your DHCP client list but has an IP in your normal range. Which suggests it is setup with a static IP. That is odd.
Some other people suggested it could be a container that is using a real IP rather than the NAT that docker etc usually use. I do know that you can use real IPs in containers, I've done it on my NAS to get a "proper" linux install on top of the NAS lite linux that is provided. But I would have expected that you'd know about that, since it would require someone to actually choose the IP address to use.
If you have managed switches you could find which port on which switch the MAC address (as found by lookuping up the arp record for the IP using arp -a) is on (provided the switch allows access to the forwarding tables). Of course, if they're on Wi-Fi it's only going to lead to the access point they're connecting to.
It could be a configured one with the default greet page still up.