187
Power-Over-Skin Makes Powering Wearables Easier
(hackaday.com)
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
this post was submitted on 04 Nov 2024
187 points (97.5% liked)
Technology
59708 readers
1504 users here now
This is a most excellent place for technology news and articles.
Our Rules
- Follow the lemmy.world rules.
- Only tech related content.
- Be excellent to each another!
- Mod approved content bots can post up to 10 articles per day.
- Threads asking for personal tech support may be deleted.
- Politics threads may be removed.
- No memes allowed as posts, OK to post as comments.
- Only approved bots from the list below, to ask if your bot can be added please contact us.
- Check for duplicates before posting, duplicates may be removed
Approved Bots
founded 1 year ago
MODERATORS
You said it right there in your comment.
Sleep mode, (and other effectively off modes) where it is functionally useless, it can do.
MSP430 can do 140uA/MHz. That is ~7 times the power that this application supplies, and that is not counting any single other chip quiescent current or chip that actively provides useful data. You would have to have a battery anyway or a big cap to provide the needed current for on-states. Or you could run it extremely low frequencies like you said, but those tend to not scale linearly at all with per MHz power ratings. Quiescent currents tend to catch up fast at that scale. I would be extremely doubtful that 150kHz would scale perfectly and wouldn't have already exponentially decayed to around its lowest possible on-state consumption for the chip. I would definitely have to see tests on that.
The smallest of batteries like the VARTA tiny cells in TWS's are infinitely more useful and practical and it would take this application months to fill a single cell, discounting all losses.
The MSP430 is just the chip I happen to use at work, if you're not convinced you could try looking for an actual ultra low power chip, I found the STM32U0 at 70uA/MHz and the STM32U5 at 16uA/MHz in the first result.
Even ignoring selecting a more efficient micro, a smattering of tiny ceramic caps will buy you a few hundred microjoules for bursts. If you're already operating at 2V you can get a 6V rated 100uF cap in a 1210 package - and that's after considering the capacitance drop with DC biasing. Each one of those would buy you 200 microjoules, even just one ought to be plenty to wake up for a few tens of milliseconds every second to get a reading from some onboard peripheral (as an example) then go to sleep again.
For sure, you're not going to be doing any heavy lifting and external peripherals could be tricky, but there are certainly embedded sensor use cases where this could be sufficient.