70
submitted 7 months ago by VitabytesDev@feddit.nl to c/linux@lemmy.ml

I wanted to install Debian Linux after a weird journey with Gentoo Linux. My partition layout is this:

  • Boot Partition (512 MiB, mount at /boot)
  • Swap Partition (4 GiB)
  • Root Partition (~80 GiB, mount at /)
  • Home Partition (~170 GiB, mount at /home, LUKS encrypted)

While trying to preserve the home partition, I think I clicked 'Configure encrypted partitions' on the Debian installer and then set a password for it (the same that it had before).

Now, I can unlock it like before, but after it is unlocked, no utility recognizes the filesystem (ext4) and the file command reports it as being data:

# file -s -L /dev/mapper/home
/dev/mapper/home: data

file on the encrypted partition returns the following:

# file -s /dev/nvme0n1p4
/dev/nvme0n1p4: LUKS encrypted file, ver 2, header size 16384, ID 3, algo sha256, salt 0x590d84c0e8397ad0..., UUID: c5ff37db-11f7-4ccf-8869-c4bc22648202, crc 0x345f75d85c9f444a..., at 0x1000 {"keyslots":{"0":{"type":"luks2","key_size":64,"af":{"type":"luks1","stripes":4000,"hash":"sha256"},"area":{"type":"raw","offse

(This is the complete output, it cuts at offset for some reason)

My luksDump output is this:

# cryptsetup luksDump /dev/nvme0n1p4
LUKS header information
Version:       	2
Epoch:         	3
Metadata area: 	16384 [bytes]
Keyslots area: 	16744448 [bytes]
UUID:          	c5ff37db-11f7-4ccf-8869-c4bc22648202
Label:         	(no label)
Subsystem:     	(no subsystem)
Flags:       	(no flags)

Data segments:
  0: crypt
	offset: 16777216 [bytes]
	length: (whole device)
	cipher: aes-xts-plain64
	sector: 512 [bytes]

Keyslots:
  0: luks2
	Key:        512 bits
	Priority:   normal
	Cipher:     aes-xts-plain64
	Cipher key: 512 bits
	PBKDF:      argon2id
	Time cost:  6
	Memory:     1048576
	Threads:    4
	Salt:       18 b4 a6 e9 87 1f 94 f6 7d 96 f2 9c 0f 2e ca 75 
	            e6 0f 80 7d 09 70 40 19 d0 a4 a1 49 ff 5c 1c 0b 
	AF stripes: 4000
	AF hash:    sha256
	Area offset:32768 [bytes]
	Area length:258048 [bytes]
	Digest ID:  0
Tokens:
Digests:
  0: pbkdf2
	Hash:       sha256
	Iterations: 171785
	Salt:       c2 b0 a6 f5 e1 bf 5f 85 82 b1 d5 f3 10 c6 ae b7 
	            7c fc 50 41 c5 a6 03 f6 5a bd ac df 46 89 7b c6 
	Digest:     57 7d fb 87 69 c5 58 07 cf 82 88 5e f8 c6 39 f5 
	            7d 00 ec 07 e0 df b8 ee b5 dd ff 20 bf b3 bc 01

My guess is that I re-encrypted the already encrypted partition. Also, I noticed that the UUID changed. Can anyone help me recover it? Thanks in advance.

If you need more logs, I will happily provide them to you.

top 15 comments
sorted by: hot top controversial new old
[-] chameleon@kbin.social 52 points 7 months ago

Given that the UUID changed, you almost certainly made a new LUKS container, overwriting the old one. That's bad, because the LUKS header is the only source of the actual encryption key that was used, and making a new one will overwrite both the main header as well as its backup copy immediately. Your password/keyfile/whatever is merely used to decrypt the part of the header that has the actual encryption key, and that's gone in that case.

Unless you have access to a header backup from before that, there's a fairly strong chance it's irrecoverable. I'd suggest going through any archives you might have to see if you have such a backup - most of the instructions on the Gentoo wiki encourage making one, so you might have made one through the power of copying & pasting instructions. Should be a file of around 16MB.

[-] VitabytesDev@feddit.nl 14 points 7 months ago

Sadly, I don't have a backup of the header. But I know the password that was used to decrypt the partition. Anyway, from the things you said, I can conclude that it might be irrecoverable.

[-] astrsk@kbin.social 10 points 7 months ago

What are the chances the header is stored in the partition map? Could you use testdisk to try and recover the old partition map and its data?

[-] VitabytesDev@feddit.nl 1 points 7 months ago

I think the header is stored in the partition map but just like chameleon said, it has been overwritten by the new one, that I created by accident.

[-] astrsk@kbin.social 2 points 7 months ago

Right, well testdisk has worked wonders in the past for me. It might worth a try especially if this is a spinning rust drive. It has helped me recover broken partitions and lost files so if you know where you’re looking you just might have a chance. I’m no expert but it seems like one of your last options with all the info provided. Best of luck!

[-] VitabytesDev@feddit.nl 1 points 7 months ago

I ran it, but no luck! In any way, I have already wiped the partition because I heard it was irrecoverable.

[-] Bitrot@lemmy.sdf.org 33 points 7 months ago* (last edited 7 months ago)

I’ve been bit by this, it has been an issue for a long time. For a while it also affected Ubuntu but I don’t know if that’s still the case.

Rather than decrypting the existing luks partition like pretty much every other distro, the Debian installer will create a new one using that key. Additionally, the installer does not cache the information and apply it when you finalize partitioning, it will apply the encryption immediately and then allow you to partition on top of it. Instant data loss.

It is possible to reuse an existing luks partition, but you must unlock and mount it manually before partitioning in the installer. This isn’t something I’d expect anyone to know beforehand, since it’s different than everything else.

Edit: apparently a very long time https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=451535

[-] Kualk@lemm.ee 4 points 7 months ago

Scary details.

[-] BCsven@lemmy.ca 11 points 7 months ago

I am not a cryptographic expert, but it sounds like you may have built a new key, and old files would be inaccessible...or that the option you chose does a file directory wipe.

[-] just_another_person@lemmy.world 6 points 7 months ago

Yes, this does seem to be the case with the info at hand. You won't be able to recover the data afaik.

[-] bloodfart@lemmy.ml 8 points 7 months ago

i think you just nuked your home partition.

[-] tkk13909@sopuli.xyz 4 points 7 months ago

I hope you have backups, man.

[-] taaz@biglemmowski.win 3 points 7 months ago

What does lsblk -f show ?

[-] Kualk@lemm.ee 3 points 7 months ago* (last edited 7 months ago)

Good reason to have external drive backup and remote site backup.

$18.49 + shipping from newegg for new 500 gb sata drive would have saved your data. At these prices it could have been your new drive. Use rsync for quick drive backup.

Remote site backup is cheap these days.

Roughly $5 per 1 Terabyte per month. You can get lower for 160 gb of data with initial upload price spike. Use rclone for offsite backup.

[-] Shady_Shiroe@lemmy.world 2 points 7 months ago* (last edited 7 months ago)

I nuked my system so many times, everything from not knowing what I was doing to using disk partion when tired and forgetting to select the usb.

Good thing my intro to Linux was through servers, I have a NAS with all my work files backed up as well as a second spare SSD that clones main SSD once a week.

this post was submitted on 13 May 2024
70 points (93.8% liked)

Linux

48655 readers
730 users here now

From Wikipedia, the free encyclopedia

Linux is a family of open source Unix-like operating systems based on the Linux kernel, an operating system kernel first released on September 17, 1991 by Linus Torvalds. Linux is typically packaged in a Linux distribution (or distro for short).

Distributions include the Linux kernel and supporting system software and libraries, many of which are provided by the GNU Project. Many Linux distributions use the word "Linux" in their name, but the Free Software Foundation uses the name GNU/Linux to emphasize the importance of GNU software, causing some controversy.

Rules

Related Communities

Community icon by Alpár-Etele Méder, licensed under CC BY 3.0

founded 5 years ago
MODERATORS