34
If you search for “3d pen filament” on AliExpress or Amazon you can get smaller quantities (often in multi bags but it’s dirt cheap)
I have done this before once, though I do find that each 'spool' of color is a bit too small especially a bowden setup as there's a good amount of waste there.
Which does work for some projects, but then not terribly viable for medium sized projects especially if I need just a bit more. I need a Goldilocks solution! lol
I might have to look more into buying more multi-bags though, nice idea!
This is the route I ultimately took and it has worked out well for me. Most of the multi-packs I found had individual rolls that were too short to really be practical. I considered buying two packs, but with a lot of brands there will be some variability between two rolls of the same color which means you can't switch mid-print. I ultimately found a pack with rolls that were twice the typical length and that has worked out well. The one I bought was Mika 3d brand on Amazon.
If you get a runout sensor, you can print the tiny bits and then the printer will wait for you to refill it.
My local public libraries offer use of their 3D printers for just the cost of filament and the prices are pretty reasonable for filament. You might be able to simply buy the small quantities of raw filament from them.
Oooh, that's a neat idea that I hadn't thought of. I'll definitely be reaching out to my library!
Not really answering your question, but have you considered painting the parts that are printed?
$225 is a ton, but you could always buy a single roll of $20 and a hobby acrylic painting kit.
9 cans of spray paint is also an option, you'd probably be upwards of $100 for that, but you're still half the cost of filament.
There are some things I do paint as a result of my struggles lol
But sometimes I don't want that aesthetic or that painting so many tiny things doesn't sound appealing from a labor perspective, etc. But yes, it's always a valid option!
If you poke around long enough, you can find sample packs of 200g-500g spools, for instance this set of 9 colours from a Canadian company (they offer most of it in individual 1kg spools as well, with Pantone colour references for matching, so if you really need to reorder you can).
The sovol brand filament you can get a pack of 2 for $35, in the states that is
Unfortunately that doesn't help me as much with the storage issue, though that's definitely decent pricing if I need two specific colors!
Whoops yeah missed the storage problem part but Stupid idea could you just hang them on the wall like every 8-12 inches put another hook? And same left to right?
Can you find anyone who provides samples?
I have used this website (UK based so no help to you I'm afraid) in the past and they provide small quantities of filament for you try https://3dfilaprint.com/filament-samples/
Might be worth having a look around to see if there is anyone stateside who does a similar service.
I'll have to look around, thanks!
Where in the world are you? Most answers to this are going to be very location specific.
Oooh, I always overlook that, good point. I'm from the US and I'll add that to my post. Thanks.
I believe Protopasta sells half size rolls. It’s a really good brand too
this post was submitted on 02 Oct 2023
34 points (94.7% liked)
3DPrinting
15505 readers
177 users here now
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io
There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml
Rules
-
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
-
Be respectful, especially when disagreeing. Everyone should feel welcome here.
-
No porn (NSFW prints are acceptable but must be marked NSFW)
-
No Ads / Spamming / Guerrilla Marketing
-
Do not create links to reddit
-
If you see an issue please flag it
-
No guns
-
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
founded 1 year ago
MODERATORS