43

Problem with WiFi driver in arch linux

Hi everyone

I've been trying to solve a problem with my arch (endeavour) instalation and wanted to know if anyone here can help

Everything is working well, excepting the WiFi connection. It is extremely slow, sometimes disconnecting from the network, and in the task bar, the WiFi icon shows that the signal strength is weak, although the router is in the same room. Switching between r8168 and r8169 as recommended doesnt work. Any ideas?

@linux

top 26 comments
sorted by: hot top controversial new old
[-] Rustmilian@lemmy.world 12 points 1 year ago* (last edited 1 year ago)

Can you run lspci -vnn | grep -i net and post it's output here, thank you.

[-] nirogu@social.vivaldi.net 3 points 1 year ago

01:00.0 Network controller [0280]: Intel Corporation Wireless 8265 / 8275 [8086:24fd] (rev 78)
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
Subsystem: ASUSTeK Computer Inc. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [1043:200f]

[-] Rustmilian@lemmy.world 11 points 1 year ago* (last edited 1 year ago)

I did some digging.
Check if iwlwifi kernel module is loaded with
lsmod | grep iwlwifi
If not sudo modprobe iwlwifi
Then in /etc/modprobe.d/iwlwifi.conf add

options iwlwifi swcrypto=1 11n_disable=1

And reboot, check if the problem is still persistent. If it is let me know, as there's a few more things we can try like disabling power management.

[-] nirogu@social.vivaldi.net 8 points 1 year ago

@Rustmilian @linux Thank you for your help! I did what you suggested and it fixed about 80% of the problem. I no longer randomly disconnect from the network and it is way faster than before, although download speed is still 8x slower than it was last week when I had fedora running instead of arch. I think I'm going to try more values for the 11n_disable parameter (there is no power management to disable), but even if it doesnt improve my machine is at least usable now. Thanks!

[-] Rustmilian@lemmy.world 2 points 1 year ago* (last edited 1 year ago)

I'm glad to hear that worked.
I suggest trying sudo iwconfig wlan0 power off replacing wlan0 as needed, this temporarily disables the wireless card's power saving features.
Then check if the speed has improved, if not, skip the following.
If it has improved make the change permanent by adding the following to file /etc/pm/power.d/disable-wireless-power-management :

#!/bin/bash
/sbin/iwconfig wlan0 power off

Then run sudo chmod +x /etc/pm/power.d/disable-wireless-power-management

I assume the linux-firmware package is already installed, but double check if you're not sure. It provides iwlwifi-8265-36.ucode in /usr/lib/firmware/ which I believe is your cards specific iwlwifi driver. Intel Wireless Firmware Page is the source that made me think to check.

If the above doesn't work let me know as there's a few more things we can try, but we're reaching the end of our options.

[-] nirogu@social.vivaldi.net 1 points 1 year ago

@Rustmilian @linux Just tried that but no change. iwconfig was not found but I installed it through the wireless_tools arch package. Also confirmed that the linux-firmware package was always been installed with the iwlwifi-8265-34 and iwlwifi-8265-36 files in the folder you said. When I ran the iwconfig wlan0 power off command, there was no error but the connection quality didnt change, so I didnt do the rest of the suggestions
@Link commented they had the same issue but in the end decided that the solution was replacing the realtek card for an intel because the drivers just dont work. Im starting to agree, but still dont know how this issue didnt exist when I had fedora running

[-] Rustmilian@lemmy.world 1 points 1 year ago* (last edited 1 year ago)

Well here's where I became less helpful. There's 3 possible things I can think of, unfortunately as I haven't had to do them myself I don't know how exactly to go about doing them.
First is to optimize the MTU settings.
Second is to optimize the Regdomain.
Third is to investigate Fedora's WiFi configuration for your card.
Sorry that I can't help you pass here.

[-] nirogu@social.vivaldi.net 2 points 1 year ago

@Rustmilian @linux Yeah, it's close to impossible to find documentation on what to do here. I'm trying to find out how is it that Fedora works well with the same hardware, and even considering changing the card itself, but for the moment at least my connection is much more stable after setting the iwlwifi.conf file
Once again, thank you for your help!

[-] Link@rentadrunk.org 3 points 1 year ago

Ah yes. I had the same issue. The realtek drivers for Wi-Fi suck on Linux. I never managed to solve it and in the end I bought an Intel AX200 and never had any more issues.

If you have to option to switch to an Intel Wi-Fi card I would highly recommend it.

[-] nirogu@social.vivaldi.net 1 points 1 year ago

@Link @linux Yeah, I'm thinking that that could be the way. I've already had a lot of progress maintaining the connection by configuring iwlwifi but it is still way slower than it should

[-] Link@rentadrunk.org 1 points 1 year ago* (last edited 1 year ago)

You can try the LTS kernel if that is available on your distro but honestly Intel Wi-Fi cards are the way to go on Linux. I wouldn't buy anything else!

Also I’m not sure you can @ someone that way.

[-] nirogu@social.vivaldi.net 1 points 1 year ago

@Link @linux Yeah the kernel changes nothing, I might have to change to intel because I dont know what else to do at software level
About the @ , I'm using my mastodon account to write all these posts and they are added automatically. Besides thats the best way for the posts I write in mastodon to appear as comments in lemmy clients. If they look weird to you it might be activitypub compatibility bugs but nothing too important :)

[-] Link@rentadrunk.org 1 points 1 year ago

Oh that’s very interesting. Didn’t expect Mastodon to be able to comment directly to Lemmy.

[-] nirogu@social.vivaldi.net 1 points 1 year ago

@Link @linux Yep, writing from Tusky right now. The fediverse is great :)

[-] _haha_oh_wow_@sh.itjust.works 3 points 1 year ago* (last edited 1 year ago)

Terrible idea here: Use ndiswrapper to make it work with a Windows driver!

Ignore me though, that'd be wacky. Just listen to Rustmilian.

[-] nirogu@social.vivaldi.net 1 points 1 year ago

I might do that if nothing else works, but it'd be really weird if there is not a simple native linux solution, I'm just not an expert lol

[-] _haha_oh_wow_@sh.itjust.works 1 points 1 year ago

Yeah, I was mostly being silly: You shouldn't have to do that but I'm no expert

[-] driving_crooner@lemmy.eco.br 2 points 1 year ago

I had the same problem with mint, the wifi worked on other distros but not in mint, I run the next lines to fix it

sudo modprove -r rtl8723be
sudo modprove rtl8723be ant_sel=1

rtl8723be is my wifi card, you can try to use the same but with yours.

[-] nirogu@social.vivaldi.net 2 points 1 year ago

@driving_crooner @linux Just did it, but no change at all. I think that would be the solution if the card weren't recognized, but the issue here is that it connects but erroneously reports weak wifi signal

[-] driving_crooner@lemmy.eco.br 1 points 1 year ago

Sorry it didn't worked. Mine have the problem, it's recognize that have a wifi connection and the available networks, but with a really weak signal.The problem with my router is that it has two antennas, for some reason sometimes the second one, who doesn't work on mint, get selected but I run that lines and work again. The first line is for reseting the router, the second is for turning out again with antenna 1 selected.

[-] knobbysideup@lemm.ee 2 points 1 year ago

Make sure that power saving is disabled.

[-] nirogu@social.vivaldi.net 2 points 1 year ago
[-] rufus@discuss.tchncs.de 1 points 1 year ago* (last edited 1 year ago)

~~You should add which wifi card we're talking about. Maybe someone has already some experience with it. lspci or lsusb will help with that.~~

Edit: Forget i asked. It's further below.

[-] Kalcifer@lemm.ee 1 points 1 year ago

Out of curiosity, what's the output of # dmesg | grep iwlwifi?

[-] nirogu@social.vivaldi.net 2 points 1 year ago

@Kalcifer @linux
[ 5.010372] iwlwifi 0000:01:00.0: enabling device (0000 -> 0002)
[ 5.108148] iwlwifi 0000:01:00.0: Detected crf-id 0xbadcafe, cnv-id 0x10 wfpm id 0x80000000
[ 5.108171] iwlwifi 0000:01:00.0: PCI dev 24fd/0110, rev=0x230, rfid=0xd55555d5
[ 5.137796] iwlwifi 0000:01:00.0: loaded firmware version 36.ca7b901d.0 8265-36.ucode op_mode iwlmvm
[ 5.556122] iwlwifi 0000:01:00.0: Detected Intel(R) Dual Band Wireless AC 8265, REV=0x230
[ 5.614915] iwlwifi 0000:01:00.0: base HW address: 60:f6:77:eb:1e:6e, OTP minor version: 0x0
[ 5.689840] iwlwifi 0000:01:00.0: iwlmvm doesn't allow to disable HW crypto, check swcrypto module parameter
[ 13.355547] iwlwifi 0000:01:00.0: Registered PHC clock: iwlwifi-PTP, with index: 0

[-] Kalcifer@lemm.ee 1 points 1 year ago

Ok, seems fine.

this post was submitted on 09 Oct 2023
43 points (95.7% liked)

Linux

47940 readers
1173 users here now

From Wikipedia, the free encyclopedia

Linux is a family of open source Unix-like operating systems based on the Linux kernel, an operating system kernel first released on September 17, 1991 by Linus Torvalds. Linux is typically packaged in a Linux distribution (or distro for short).

Distributions include the Linux kernel and supporting system software and libraries, many of which are provided by the GNU Project. Many Linux distributions use the word "Linux" in their name, but the Free Software Foundation uses the name GNU/Linux to emphasize the importance of GNU software, causing some controversy.

Rules

Related Communities

Community icon by Alpár-Etele Méder, licensed under CC BY 3.0

founded 5 years ago
MODERATORS