195
A few tuning pegs made from roasted maple (feddit.org)
submitted 3 weeks ago* (last edited 3 weeks ago) by alleycat@feddit.org to c/woodworking@lemmy.ca
15 comments fedilink hide all child comments

Tuning pegs for musical instruments are commonly made from ebony or boxwood, but in medieval times and renaissance they would also be made from roasted maple. Maple is a relatively soft wood, so the trick is to roast it, which makes it very light and porous, and then let it soak in a mixture of linseed oil and turpentine overnight. It soaks the oil in like a sponge, going from swimming on the surface to sinking to the ground when it's saturated. The oil hardens and reinforces the wood, kind of like epoxy stabilised wood.

top 15 comments
sorted by: hot top controversial new old
[-] Jake_Farm@sopuli.xyz 15 points 3 weeks ago* (last edited 3 weeks ago)

So it is bioresin stablized wood! Ingenious!

[-] Kirp123@lemmy.world 12 points 3 weeks ago

You roasted that maple? What did you call it?

[-] violetsoftness@piefed.blahaj.zone 10 points 3 weeks ago

maple wood?! you're not hardwood, you’re basically tree syrup in disguise. The only thing softer than you is the pancake you’re poured on!

boom roasted!

[-] alleycat@feddit.org 7 points 3 weeks ago* (last edited 3 weeks ago)

I've just bought it roasted. It was originally intended for billiard cues.

Edit: sorry, I missed the joke. 😅

[-] Shayeta@feddit.org 11 points 3 weeks ago

How long does it have to dry after that?

[-] alleycat@feddit.org 13 points 3 weeks ago

Honestly, I don't know. I didn't expect to see literal air bubbles rising from the wood in the oil bath. That's a lot of oil, so I expect several months for it to fully harden. Maybe I can speed up the process with an UV lamp.

[-] moody@lemmings.world 9 points 3 weeks ago

Linseed oil polymerizes very quickly. It probably won't be as long as you expect.

[-] MxRemy@piefed.social 9 points 3 weeks ago* (last edited 3 weeks ago)

If you really wanna see some bubbles, check if your local woodshop will let you stick that wood/oil combo in their vacuum chamber!

This project rules, great job

[-] HeyThisIsntTheYMCA@lemmy.world 5 points 3 weeks ago

those are gorgeous

[-] homesweethomeMrL@lemmy.world 4 points 3 weeks ago

And here I thought Jimi Hendrix invented roasted maple instruments.

but srs I didn't know about the soaking in oil afterwards, that's very interesting!

[-] SouthFresh@lemmy.world 4 points 3 weeks ago

How do they taste?

[-] alleycat@feddit.org 4 points 3 weeks ago

Like linseed oil and caramel.

[-] captain_aggravated@sh.itjust.works 3 points 3 weeks ago

Guitarist spoiled with worm gear tuning machines here: How do these actually work? Do they just friction fit in a tapered hole?

[-] alleycat@feddit.org 3 points 3 weeks ago

Yup, they're just lightly pressed into a tapered hole. You just have to turn them with a greater force than the string exerts on them, and ideally they stay put after you let go of them. Works well for gut/synthetic strings, less so for steel strings because those lengthen very little so friction tuners would be too imprecise.

[-] ellisk@lemmy.ca 3 points 3 weeks ago

I'm going to have to try this! Very curious about just how hard it turns out to be in the end.

this post was submitted on 03 Sep 2025
195 points (100.0% liked)

Woodworking

7859 readers
142 users here now

A handmade home for woodworkers and admirers of woodworkers. Our community icon is submitted by @1985MustangCobra@lemmy.ca whose father was inspired to start woodworking by Norm and the New Yankee Workshop.

founded 2 years ago
MODERATORS
NataliePortland@lemmy.ca
captain_aggravated@sh.itjust.works