1

The really nice thing about them is that they accept 3v3 logic when being powered by 5v. Although that usually works with the WK6812, it's technically out of spec and I have read about this causing stability issues. They are also pretty low power, 12mA at max brightness (these are at 1/32).

They are reverse-mount, so you don't have to be concerned about keycaps colliding with LEDs.

Firmware is still definitely a WIP, as is the motherboard (the keyboards are i2c daughter boards as per my previous post). I have switched to embassy-rs, which is way more ergonomic than embedded-hal - async rust makes tons of sense for embedded dev. I'm also going to be printing blank shields for the RPi Picos, to hide that green a little better.

If you've been putting off designing your own keeb, I strongly recommend it. It's really rewarding.

no comments (yet)
sorted by: hot top controversial new old
there doesn't seem to be anything here
this post was submitted on 03 Oct 2023
1 points (100.0% liked)

ErgoMechKeyboards

5686 readers
250 users here now

Ergonomic, split and other weird keyboards

Rules

Keep it ergo

Posts must be of/about keyboards that have a clear delineation between the left and right halves of the keyboard, column stagger, or both. This includes one-handed (one half doesn't exist, what clearer delineation is that!?)

i.e. no regular non-split¹ row-stagger and no non-split¹ ortholinear²

¹ split meaning a separation of the halves, whether fixed in place or entirely separate, both are fine.
² ortholinear meaning keys layed out in a grid

No Spam

No excessive posting/"shilling" for commercial purposes. Vendors are permitted to promote their products/services but keep it to a minimum and use the [vendor] flair. Posts that appear to be marketing without being transparent about it will be removed.

No Buy/Sell/Trade

This subreddit is not a marketplace, please post on r/mechmarket or other relevant marketplace.

Some useful links

founded 1 year ago
MODERATORS