17

I have a moderately long HDMI cable running to a screen that has worked for quite a while. Recently the screen lost its connection. I replaced the cable with the exact same model of HDMI cable, and its all good. The cables arent frequently inserted or removed, and they are otherwise in good condition. I have no idea how or why this could happen. Any ideas?

top 7 comments
sorted by: hot top controversial new old
[-] carl_dungeon@lemmy.world 7 points 9 months ago

Corrosion? Connectors sometimes get a little crusty over time, especially from humidity. I keep a can of deoxIT handy, it works wonders. You can spray a little in the connector and the socket and plug/unplug a few times. I’d be curious if your old cable would work again if you tried that.

[-] CameronDev@programming.dev 3 points 9 months ago

Worth a try, but not a particularly humid area. I did plug them in an out a few times while i was investigating, maybe worth trying some more.

[-] rivvvver@lemmy.dbzer0.com 4 points 9 months ago

this could be for a lot of reasons. the cable might have some kinks in it from pushing furniture into it, bending it a little too much, or even just sitting bent for too long.

u could try to plug it back in and then bending it throughout its length at various spots and seeing if it comes back, to locate where the issue is.

but its certainly not unheard of for old cables to just get a small breakage somewhere. it doesnt always have to be the connectors.

[-] CameronDev@programming.dev 1 points 9 months ago

Cable sits fairly flat across the floor, relatively unmoved, but safe from beeing stepped on or damaged. I did move the cable around a bit while testing, but no luck.

[-] Lodespawn@aussie.zone 2 points 9 months ago

Is your HDMI cable good quality? Is your tv good quality? Dissimilar metals on either will result in transfer of materials over time and degredation of their ability to transfer signal at the rates expected for HDMI. Normally just a reseat of the cable should fix this but extended use could result in permanent impairment of the interface.

[-] CameronDev@programming.dev 2 points 9 months ago

They are default cables that came with Dell monitors. So, no idea quality wise. Reseating didnt help unfortunately.

[-] Lodespawn@aussie.zone 2 points 9 months ago

Probably reasonable quality if they are dell supplied ones. Apologies, when you said they were long I thought they might have been some funny make with potentially questionable standards interpretation. If the cables aren't moving around, under tension or being squished/crushed they should be one of the last things to fail, and a reseat should fix most issues.

this post was submitted on 08 Dec 2023
17 points (100.0% liked)

techsupport

2239 readers
1 users here now

The Lemmy community will help you with your tech problems and questions about anything here. Do not be shy, we will try to help you.

If something works or if you find a solution to your problem let us know it will be greatly apreciated.

Rules: instance rules + stay on topic

Partnered communities:

You Should Know

Reddit

Software gore

Recommendations

founded 1 year ago
MODERATORS