39
Follow-up to installing Arch
(lemm.ee)
This is the guide I followed when I was installing Arch manually. I hope the method has not changed. Make sure to choose the correct partition if you're planning on dual booting.
Here is an alternative Piped link(s):
https://www.piped.video/watch?v=68z11VAYMS8
Piped is a privacy-respecting open-source alternative frontend to YouTube.
I'm open-source; check me out at GitHub.
Installing arch on OneDrive is an entertaining concept
But Microsoft would cuck your Arch install if it were somehow installed onto onedrive D':
It would still somehow manage to overwrite whatever would pass for a boot loader
What boot loader are you using? That is what allows you to pick between what OS (in your case, drive) to boot at power-on.
Are you using UEFI for this?
I am using UEFI, and GRUB for my bootloader. I did update my post with a bit more information now.
I was not able to select boot order in BIOS because it wasn't reporting properly, or my drives were "messed up" along the way.
I did not have the option for my Windows drive listed as a bootable option. It did however show a generic entry for my WD Black drive (which is what I installed Arch on) as a bootable entry, but it ended up booting to windows after forcing the machine down because Arch hung at initializing Ramdisk.
I had the afterthought to choose to install os-prober for grub within additional packages.
Hmm.
Not being able to select boot order in BIOS suggests something very strange is going on, because it suggests that the BIOS can't see all the drives. That has to happen before the bootloader can be evoked.
It sounds like GRUB is installed on the WD Black. BIOS -> drives it can see -> boot loader
What was the specific error that the Arch boot attempt threw? How did os-prober work for you?
@drwho @Hellmo_Luciferrari it's not uncommon (and documented somewhere) to need to run os-prober a second time after install ; I had this 2 last times : install, get os-prober to find everything but W ; fully boot into arch when all is good, run it again and it will discover it.
Thank you for the tip. I didn't end up trying os-prober at all. I just ripped the windows drive out, and was able to get Arch installed and booted.
The issue I have now is completely different now, but I will likely revisit having Windows on another drive for the very few things that it would make easier for me.
For now it is time to wrestle with my 3090. Which I can't say I am exactly thrilled or shocked about.
I sorted out Arch not booting. By taking out the Windows drive, Arch boots just fine.
If I am not mistaken, having them on separate drives may have caused some issues. Someone else somewhere had suggested that is known to cause issues.
Not sure if it's windows and GRUB fighting even though they are on two separate hard drives.
I did not end up trying os-prober at all. I went the more drastic method of removing the drive because the end goal is to ditch windows anyways.
Though my issues with Arch are a completely different thing entirely. Mostly fighting with my GPU to cooperate.
So did you actually turn off secure boot in your UEFI setup? Or did you just state that it's off to archinstall?
I turned it off in bios. Sorry for confusion due to order of information or wording.
I had a similar issue with my laptop, where Arch wouldn't be recognized as a bootable system on my NVMe drive unless I disabled RST with Optane on the BIOS, setting it to AHCI mode.
I do remember seeing a similar issue a while ago as well, but I don't remember if the user managed to fix it.
I could suggest removing the Windows drive, installing Arch and checking if everything works, then plugging the Windows drive back in. Windows loves to delete non-Windoes bootloaders from every drive it can.
Ultimately, I removed the windows drive, it booted. But yay Novideo, I mean Nvidia drivers on arch is a pain.
From past forums reading I remember that a boot loader in Linux can have trouble booting properly when you use two different physical drives (Rather than one drive and different partitions), I think it needs to specifically get to know about both drives. Does this help ?
That very well may help, I read a bit of what you sent. I will have to try when not at work. Thank you!
have you turned off avx512
I have not, but I can look into how to do that. What would that do, if I may ask?
it's an instruction set only available in early 12th gen intel chips, so you can usually go into the bios and find settings to turn it off.
What benefit would disabling it have for someone such as myself?
it just didn't boot for me when that was enabled
this post was submitted on 22 Jan 2024
39 points (97.6% liked)
Linux
48152 readers
635 users here now
From Wikipedia, the free encyclopedia
Linux is a family of open source Unix-like operating systems based on the Linux kernel, an operating system kernel first released on September 17, 1991 by Linus Torvalds. Linux is typically packaged in a Linux distribution (or distro for short).
Distributions include the Linux kernel and supporting system software and libraries, many of which are provided by the GNU Project. Many Linux distributions use the word "Linux" in their name, but the Free Software Foundation uses the name GNU/Linux to emphasize the importance of GNU software, causing some controversy.
Rules
- Posts must be relevant to operating systems running the Linux kernel. GNU/Linux or otherwise.
- No misinformation
- No NSFW content
- No hate speech, bigotry, etc
Related Communities
Community icon by Alpár-Etele Méder, licensed under CC BY 3.0
founded 5 years ago
MODERATORS