Let me introduce you to tolerance in measuring instruments and measuring errors.

Edit: Apparently I'm pro evil companies because I just pointed out that scales (and more importantly non-professional scales) have relatively high error tolerances (+ the measurament method error). Thus the measuring of this pasta and the possible interpretations of it have to take into account that.

Sup, I'm your local friendly USDA contractor who very much uses scales everyday. Consumer grade kitchen scales are terrible and will lie to you. The fact that it does not go out to the tenths or hundredths is a big flag for accuracy.

We check test our scales twice a year to make sure they are accurate. I once tried check testing my kitchen scale I use for canning for giggles and it failed miserably. It would only register weight on 2 out of 4 quadrants until I got to 10g or so. I'm sure my ohaus is going to show a different and more accurate result if I where to try it.

wouldnt weight slightly fluctuate with moisture content?

-2% is probably allowed and this is -1.95%. It's okay I guess. I'd probably trust my cheap, regularly used and never calibrated kitchen scale less than I would trust these companies to comply with such rules.

The FDA regulation on Net Weight is found in 21 CFR 101.105. In this regulation FDA makes allowance for reasonable variations caused by loss or gain of moisture during the course of good distribution practice or by unavoidable deviations in good manufacturing practice. FDA states that variations from the stated quantity of contents should not be unreasonably large.

While FDA does not provide a specific allowable tolerance for Net Weight, this matter could come under FTC jurisdiction. FTC has proposed regulations that would unify USDA and FDA Net Contents labeling and incorporate information found in the National Institute of Standards & Technology (NIST) Handbook 133.

NIST Handbook 133 specifies that the average net quantity of contents in a lot must at least equal the net quantity declared on the label. Plus or minus deviation is permitted when caused by unavoidable variation in weighing and measuring that occur in good manufacturing practice. The maximum allowable variance for a package with a net weight declaration of 5 oz is 5/16 oz. Packages under-filled by more than this amount are considered non-compliant.

http://www.foodconsulting.com/q&a.htm

On our packaging (Germany) we have a little "e" meaning it will be ± the weight with a deviation of 1.5-9% depending on the volume.
https://www.payback.de/ratgeber/besser-leben/kleines-e-auf-verpackung

I don’t see anything on the scale indicating it was not tared. Nor do I know whether or not you took a noodle or two out of the pile before weighing

For all we know, you tared this +20g and this is feel-good anti-corporate propaganda. Which is fine, we all hate the corporations…but propaganda is propaganda.

Op, please post a video showing a calibration weight on the scale followed immediately by your pasta taken directly out of a sealed box. For science.

It's a 2% difference. The cutting and packaging is done (most probably) by machines. I have clinically diagnosed OCD, and I wouldn't care about 8g of missing pasta... How much do you leave on the plate/in the pot/throw away? :)

Otoh, hitting exactly 410g (assuming the scale is calibrated, and you have the same temperature, air moisture and altitude as the factory), is very difficult. They could adjust their machines so the variation hangs a bit more towards the customer, but for them, 2% x millions of boxes = profit.

🤔Hmm doubt it's humidity issue the issue. But more importantly why is it not in 500g packets like all the pasta in the world?

How do we know your scale is right?

Get a better scale first

You've bought spaghetti Kelly, not cocaine.

I worked on a manufacturing line for 4oz pepper cans

They had a machine that weighed them and kicked out underweight ones.

The tolerances were horrible.

McCormick was 3.9 I think

Black and white can 3.5. !!!

Yes both were made on the same exact line

Depending on where you live this is actually illegal. In Germany, as example, if you say that something contains 200g it means that there have to be at least 200g inside. If its less, that can cost the producer a lot if he gets fined for it.

Yes, it seems that way because your kitchen scale is faulty and measuring everything a bit on the light side.

If everything you're measuring is lower than expected, you should check the calibration of the scale. Weigh 2 or 3 things you know the weight of that are at different ranges of weights, light, heavy, medium, and see if any are off. Often a scale will be accurate at only within a certain range and get progressively less accurate as the weight increases or decreases from that range.

Could be worth checking your scale, if everything seems to be underweight. Low battery can show as lower result on some scales

I have the same scale. I wouldn't trust it too far, especially combined with the tolerances and humidity weight changes.

There are different factors. One being accuracy of the scale, then there is loss of weight due to moisture loss, and also there are greedy companies. It can be any of theese(or a combination of theese)

Well... Cardboard is quite edible, maybe you should also put it on the balance.

I weighted my 500 gram broccoli recently and it was over 800 grams so I guess this goes both ways. Or then they're compensating for the stem.