virtualizing PFSense. What else works besides ESXi for virtual networking? (lemmy.world)

submitted 8 months ago by kalpol@lemmy.world to c/selfhosted@lemmy.world

43 comments fedilink hide all child comments

with the demise of ESXi, I am looking for alternatives. Currently I have PfSense virtualized on four physical NICs, a bunch of virtual ones, and it works great. Does Proxmox do this with anything like the ease of ESXi? Any other ideas?

all 44 comments

sorted by: hot top controversial new old

[-] DeltaTangoLima@reddrefuge.com 30 points 8 months ago

Tossing in my vote for Proxmox. I'm running OPNsense as a VM without any issues. I did originally try pfSense, but didn't like it for some reason (I genuinely can't recall what it was).

Either way, Proxmox virtual networking has been relatively easy to learn.

[-] ikidd@lemmy.world 10 points 8 months ago

pfSense, but didn’t like it for some reason

Probably the shitbirds at Netgate put you off it, understandably.

[-] anamethatisnt@lemmy.world 11 points 8 months ago

No problem using multiple physical and virtual ports for a pfsense in proxmox

[-] kalpol@lemmy.world 2 points 8 months ago

Admittedly I have not dug too deeply into Proxmox but its learning curve appears kinda steep.

[-] anamethatisnt@lemmy.world 7 points 8 months ago

There's multiple guides on virtualizing pfsense in proxmox, but the easiest is to simply pci passthrough the nics you wanna use.
I do recommend you leave a physical nic for proxmox itself to maintain LAN access to it if your pfsense is down.

[-] twei@discuss.tchncs.de 1 points 8 months ago

There could be driver issues doing this. I had a bad experience with Emulex NICs under OPNsense, Intel OTOH worked flawlessly. Switched back to virtual interfaces tho, as it works about as good as a physical NIC

[-] BlueEther@no.lastname.nz 5 points 8 months ago

its not too bad. i switched from esxi to proxmox about 2 years ago.

i run a virtualized opnsense with 2 nic's passed through and another 2 virt, so it can be done

[-] b3an@lemmy.world 1 points 8 months ago

Hey! I have been using ESXi about three year now. I have two identical NIC I bought. One for WAN and one for LAN. I also discovered I had to use the onboard LAN port (3rd port!) just to be able to access the web control. (Is that normal?)

Anyway, I want to move to Proxmox, and then virtualize my OPNSense like I have on ESXi.

I get so confused by how the adapters should be. Ideally I would love to have the LAN connect to a (dumb) switch, and provide Wi-Fi. But one thing I never tried before is a VLAN to protect the LAN from the Wi-Fi traffic, but still allowing some systems to still work like streaming data from the wired PC on the LAN to the NVIDIA Shield Pro. But then keeping the Alexa/Echo system on a more restricted WiFi.

Can I do all this? I’m thinking I can, but. The hurdle of learning vlans and configuring the new Proxmox (which I’m pretty damn new to) is a daunting challenge.

I’m ready to try this though. I have a 4G wireless plus WiFi system to keep the other half happy while I tinker to get it all working.

Thoughts/Tips? Anyone?

[-] BlueEther@no.lastname.nz 1 points 8 months ago

All doable, you might need a managed or smart switch though

I have 4 bland at home plus untagged all through proxmox and a smart switch

one for wan
one for web facing servers
one for iot
one for guest wifi
rest of lab is untagged

[-] b3an@lemmy.world 1 points 8 months ago

Notes about the switch. What is tagging? The purpose and where?

[-] BlueEther@no.lastname.nz 2 points 8 months ago

vlan tags, they make vlans work

[+] TCB13@lemmy.world -6 points 8 months ago

And in about 2 years you'll switch to LXD/Incus. :P

[-] BlueEther@no.lastname.nz 2 points 8 months ago

I'm currently off work with a broken shoulder, have you just given me a project?

[-] TCB13@lemmy.world 3 points 8 months ago

Ahahaha that's up to you. All best for your shoulder!

[-] tofubl@discuss.tchncs.de 1 points 8 months ago

Incus looks cool. Have you virtualised a firewall on it? Is it as flexible as proxmox in terms of hardware passthrough options?

I find zero mentions online of opnsense on incus. 🤔

[-] TCB13@lemmy.world 2 points 8 months ago* (last edited 8 months ago)

Yes it does run, but BSD-based VMs running on Linux have their details as usual. This might be what you're looking for: https://discuss.linuxcontainers.org/t/run-freebsd-13-1-opnsense-22-7-pfsense-2-7-0-and-newer-under-lxd-vm/15799

Since you want to run a firewall/router you can ignore LXD's networking configuration and use your opnsense to assign addresses and whatnot to your other containers. You can created whatever bridges / vlan-based interface on your base system and them assign them to profiles/containers/VMs. For eg. create a cbr0 network bridge using systemd-network and then run lxc profile device add default eth0 nic nictype=bridged parent=cbr0 name=eth0 this will use cbr0 as the default bridge for all machines and LXD won't provide any addressing or touch the network, it will just create an eth0 interface on those machines attached to the bridge. Then your opnsense can be on the same bridge and do DHCP, routing etc. Obviously you can passthrough entire PCI devices to VMs and containers if required as well.

When you're searching around for help, instead of "Incus" you can search for "LXD" as it tend to give you better results. Not sure if you're aware but LXD was the original project run by Canonical, recently it was forked into Incus (and maintained by the same people who created LXD at Canonical) to keep the project open under the Linux Containers initiative.

[-] tofubl@discuss.tchncs.de 2 points 8 months ago

OPNsense running in the Incus live demo. Fun!

[-] TCB13@lemmy.world 1 points 8 months ago

Enjoy your 30 min of Incus :P

[-] tofubl@discuss.tchncs.de 2 points 8 months ago

With Incus only officially supported in Debian 13, and LXD on the way out, should I get going with LXD and migrate to Incus later? Or use the Zabbly repo and switch over to official Debian repos when they become available? What's the recommended trajectory, would you say?

[-] TCB13@lemmy.world 2 points 8 months ago

It depends on how fast you want updates. I'm sure you know how Debian works, so if you install LXD from Debian 12 repositories you'll be on 5.0.2 LTS most likely for ever. If you install from Zabbly you'll get the latest and greatest right now.

My companies' machines are all running LXD from Debian repositories, except for two that run from Zabbly for testing and whatnot. At home I'm running from Debian repo. Migration from LXD 5.0.2 to a future version of Incus with Debian 13 won't be a problem as Incus is just a fork and stgraber and other members of the Incus/LXC projects work very closely or also work in Debian.

Debian users will be fine one way or the other. I specifically asked stgraber about what's going to happen in the future and this was his answer:

We’ve been working pretty closely to Debian on this. I expect we’ll keep allowing Debian users of LXD 5.0.2 to interact with the image server either until trixie is released with Incus available OR a backport of Incus is made available in bookworm-backports, whichever happens first.

I hope this helps you decide.

[-] tofubl@discuss.tchncs.de 2 points 8 months ago

Absolutely. Great intel; thank you!

[-] tofubl@discuss.tchncs.de 1 points 8 months ago

Very informative, thank you.

I am generally very comfortable with Linux, but somehow this seems intimidating.

Although I guess I'm not using proxmox for anything other than managing VMs, network bridges and backups. Well, and for the feeling of using something that was set up by people who know what they're doing and not hacked together by me until it worked...

[-] TCB13@lemmy.world 2 points 8 months ago

I guess I’m not using proxmox for anything other than managing VMs, network bridges and backups.

And LXD/Incus can do that as well for you. Install it an by running incus init it will ask you a few questions and get an automated setup with networking, storage etc. all running and ready for you to create VMs/Containers.

What I was saying is that you can also ignore the default / automated setup and install things manually if you've other requirements.

[-] tofubl@discuss.tchncs.de 1 points 8 months ago* (last edited 8 months ago)

Okay, I think I found a bit of a catch with Incus or LXD. I want a solution with a web UI, and while Incus has one, it seems to have access control either browser certificate based or with a central auth server. Neither are a good solution for me - I would much prefer regular user auth with the option to use an auth server at some point (but I don't want to take all of this on all at once.)

I hope it's okay that I keep coming back to you with these questions. You seem to be a strong Incus-evangelist. :)

I guess I could only expose the web UI on localhost and create an SSH tunnel in order to use it...? Not so good on mobile though, which is the strongest reason for a webui.

[-] TCB13@lemmy.world 2 points 8 months ago* (last edited 8 months ago)

You aren't wrong, the WebUI is stateless, it doesn't know of any users nor it stores any other context information.

The certificates are required for the UI client to authenticate with the underlying LXD server itself. Much like the SSH authentication is boils down to creating a public/private key pair and the PK is added to your browser(s) and the public key to the server. I believe this is a good walkthrough of the process for anyone starting out.

At work we use Authelia and HAProxy to get around the need to distribute a certificate for each client / mange our logins with SSO and 2FA. At home I simply use Nginx as a reverse proxy to the WebUI with the proxy_ssl_certificate passing a certificate down to it. Here another configuration example of how to use Nginx to pass the certificate, you can then use Basic HTTP Auth to add a simple username/password to it.

[-] tofubl@discuss.tchncs.de 2 points 8 months ago* (last edited 8 months ago)

Thanks for your patience. I appreciate it and I'm learning a lot. 🙏

There's a chance yet!

edit: That actually seems simple enough and should integrate nicely with the rest of my network. Cool!

[-] tofubl@discuss.tchncs.de 1 points 8 months ago* (last edited 8 months ago)

I have another question, if you don't mind: I have a debian/incus+opnsense setup now, created bridges for my NICs with systemd-networkd and attached the bridges to the VM like you described. I have the host configured with DHCP on the LAN bridge and ideally (correct me if I'm wrong, please), I'd like the host to not touch the WAN bridge at all (other than creating it and hooking it up to the NIC).

Here's the problem: if I don't configure the bridge on the host with either dhcp or a static IP, the opnsense VM also doesn't receive an IP on that interface. I have a br0.netdev to set up the bridge, a br0.network to connect the bridge to the NIC, and a wan.network to assign a static IP on br0, otherwise nothing works. (While I'm working on this, I have the WAN port connected to my old LAN, if it makes a difference.)

My question is: Is my expectation wrong or my setup? Am I mistaken that the host shouldn't be configured on the WAN interface? Can I solve this by passing the pci device to the VM, and what's the best practice here?

Thank you for taking a look! 😊

[-] TCB13@lemmy.world 2 points 8 months ago* (last edited 8 months ago)

Am I mistaken that the host shouldn’t be configured on the WAN interface? Can I solve this by passing the pci device to the VM, and what’s the best practice here?

Passing the PCI network card / device to the VM would make things more secure as the host won't be configured / touching the network card exposed to the WAN. Nevertheless passing the card to the VM would make things less flexible and it isn't required.

I think there's something wrong with your setup. One of my machines has a br0 and a setup like yours. 10-enp5s0.network is the physical "WAN" interface:

root@host10:/etc/systemd/network# cat 10-enp5s0.network
[Match]
Name=enp5s0

[Network]
Bridge=br0 # -> note that we're just saying that enp5s0 belongs to the bridge, no IPs are assigned here.

root@host10:/etc/systemd/network# cat 11-br0.netdev
[NetDev]
Name=br0
Kind=bridge

root@host10:/etc/systemd/network# cat 11-br0.network
[Match]
Name=br0

[Network]
DHCP=ipv4 # -> In my case I'm also requesting an IP for my host but this isn't required. If I set it to "no" it will also work.

Now, I have a profile for "bridged" containers:

root@host10:/etc/systemd/network# lxc profile show bridged
config:
 (...)
description: Bridged Networking Profile
devices:
  eth0:
    name: eth0
    nictype: bridged
    parent: br0
    type: nic
(...)

And one of my VMs with this profile:

root@host10:/etc/systemd/network# lxc config show havm
architecture: x86_64
config:
  image.description: HAVM
  image.os: Debian
(...)
profiles:
- bridged
(...)

Inside the VM the network is configured like this:

root@havm:~# cat /etc/systemd/network/10-eth0.network
[Match]
Name=eth0

[Link]
RequiredForOnline=yes

[Network]
DHCP=ipv4

Can you check if your config is done like this? If so it should work.

[-] tofubl@discuss.tchncs.de 1 points 8 months ago* (last edited 8 months ago)

My config was more or less identical to yours, and that removed some doubt and let me focus on the right part: Without a network config on br0, the host isn't bringing it up on boot. I thought it had something to do with the interface having an IP, but turns out the following works as well:

user@edge:/etc/systemd/network$ cat wan0.network
[Match]
Name=br0

[Network]
DHCP=no
LinkLocalAddressing=ipv4

[Link]
RequiredForOnline=no

Thank you once again!

[-] TCB13@lemmy.world 2 points 8 months ago* (last edited 8 months ago)

Oh, now I remembered that there's ActivationPolicy= on [Link] that can be used to control what happens to the interface. At some point I even reported a bug on that feature and vlans.

I thought it had something to do with the interface having an IP (...) LinkLocalAddressing=ipv4

I'm not so sure it is about the interface having an IP... I believe your current LinkLocalAddressing=ipv4 is forcing the interface to get up since it has to assign a local IP. Maybe you can set LinkLocalAddressing=no and ActivationPolicy=always-up and see how it goes.

[-] tofubl@discuss.tchncs.de 2 points 8 months ago

You know your stuff, man! It's exactly as you say. 🙏

[-] TCB13@lemmy.world 1 points 8 months ago

You're welcome.

[-] MangoPenguin@lemmy.blahaj.zone 3 points 8 months ago

It's not too different from ESXi, things are just named differently in the webUI.

[-] ikidd@lemmy.world 3 points 8 months ago* (last edited 8 months ago)

Proxmox is quite simple. As a former VCP, I find Proxmox more intuitive to use.

If you need specific help with Proxmox and/or ZFS, you might also look at posting on https://www.practicalzfs.com

And +1 for using OPNsense

[-] kylian0087@lemmy.world 2 points 8 months ago

From my understanding is that Proxmox is one of the more easy platforms to learn. I must say iI never used it personally.

[-] Decronym@lemmy.decronym.xyz 4 points 8 months ago* (last edited 8 months ago)

Acronyms, initialisms, abbreviations, contractions, and other phrases which expand to something larger, that I've seen in this thread:

Fewer Letters	More Letters
ESXi	VMWare virtual machine hypervisor
HTTP	Hypertext Transfer Protocol, the Web
IP	Internet Protocol
LTS	Long Term Support software version
LXC	Linux Containers
SSH	Secure Shell for remote terminal access
SSO	Single Sign-On
VPN	Virtual Private Network
ZFS	Solaris/Linux filesystem focusing on data integrity
nginx	Popular HTTP server

10 acronyms in this thread; the most compressed thread commented on today has 28 acronyms.

[Thread #508 for this sub, first seen 13th Feb 2024, 06:05] [FAQ] [Full list] [Contact] [Source code]

[-] possiblylinux127@lemmy.zip 4 points 8 months ago

Proxmox is great

[-] Unyieldingly@lemmy.world 2 points 8 months ago

Proxmox, TrueNAS, Debian with cockpit etc. really any type 1 hyperviser work's.

[-] TheHolm@aussie.zone 2 points 8 months ago

Nothing can beat bhyve for PFSence.

[-] stewie410@programming.dev 1 points 8 months ago

We've been running KVM on CentOS/Rocky hosts for our VM platforms; seems to work fine for our needs.

I'm not sure how ESXi would differ as I've never used it, but may be an option if you want to roll your own vs proxmox.

[-] CarbonatedPastaSauce@lemmy.world 1 points 8 months ago* (last edited 8 months ago)

I ran it on Hyper-V for many years. Still running OPNsense that way. It manages 4 VLANS, RDNSBL, a metric ass ton of firewall rules, and several VPN clients and gateways, with just 2GB of ram and 4 virtual procs. It works and doesn’t even breathe hard.

[-] node815@lemmy.world 1 points 8 months ago

As Another Proxmox user - I've been doing well with it. I use these scripts for the LXC's which has been fantastic:

https://tteck.github.io/Proxmox/

I also can log into it from the web as it's secured by Authentik, SSO OIDC login when Away from home and need to manage it. Rare! But the option is there! :)

[-] genie@lemmy.world 1 points 8 months ago

I see a lot of love for proxmox in this thread.

Word of warning from my experience, sometimes PfSense seems to get confused with virtual interfaces. It works flawlessly once it's up and running, but every time I reboot I have to assign interfaces. It will hang until I do so and will not completely come back online until I manually intervene.

this post was submitted on 12 Feb 2024

31 points (94.3% liked)

Selfhosted

39677 readers

433 users here now

A place to share alternatives to popular online services that can be self-hosted without giving up privacy or locking you into a service you don't control.

Rules:

Be civil: we're here to support and learn from one another. Insults won't be tolerated. Flame wars are frowned upon.
No spam posting.
Posts have to be centered around self-hosting. There are other communities for discussing hardware or home computing. If it's not obvious why your post topic revolves around selfhosting, please include details to make it clear.
Don't duplicate the full text of your blog or github here. Just post the link for folks to click.
Submission headline should match the article title (don’t cherry-pick information from the title to fit your agenda).
No trolling.

Resources:

selfh.st Newsletter and index of selfhosted software and apps
awesome-selfhosted software
awesome-sysadmin resources
Self-Hosted Podcast from Jupiter Broadcasting

Any issues on the community? Report it using the report flag.

Questions? DM the mods!

founded 1 year ago

MODERATORS

HybridSarcasm@lemmy.world

HybridSarcasm@lemmy.hybridsarcasm.xyz