Hmmm, huge burnt up glob of filament that was stuck to the nozzle, came off, cooled and then caused a layer shift?
Just a guess from what I can see.
Zoom in -- That is the nozzle itself on the print!!!! lol
That helps to reinforce the print. Tactical nozzle deposition.
PLA+Brass
Lol, wow. That's definitely a new one. I thought that was a burnt blob.
Ha! I guess the nozzle just came loose over time?
What is that a bug?… Oh…. The nozzle… Yeah, that’s a new one
Just..... how?!?
Just playing a guessing game here...
The nozzle was probably already loose, for starters. It may have been possible for the nozzle to catch on the print with a blob that was forming from the loose nozzle.
Once the nozzle was stuck to the print, it got ripped off the bed and the movement of the gantry likely caused the print to spin. If a "leg" kept getting caught on something during travel, that would make sense.
After a few dozen moves, presto! Nozzle is unscrewed and is now one with the print.
Unless something in the hotend was actually broken to cause this, it's a perfect example of why nozzles should be tightened at a higher than normal temperature. Loose nozzle == bad time.
Somehow, I can identify myself with that title too much
Weird. What hotend?
mostly out of the box one of these https://kingroon.com/products/official-kingroon-kp5l-3d-printer
I could be remembering wrong but kingroon are mostly groove mount v6? It's even more puzzling. Are the threads ripped off on the nozzle or block or did it unscrew itself?
I didn't check but the threads on the hotend are in good shape. It must have unscrewed itself. I think I can barely see some threads in the picture.
Did you perhaps forget to hot tighten the nozzle? That's a crazy failure to have.
I had just put it on hot earlier that day. I must not have tightened it fully I don't have any other explanation.
Wait...did the nozzle crack in to two parts!?
Nope -- right side is blob, left is nozzle
Ah OK, the thread on the nozzle just looked too short and a bit like it was broken at an angle.
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io
There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
