206
New Forklift [Rule] (files.catbox.moe)
top 32 comments
sorted by: hot top controversial new old
[-] Hugh_Jeggs@lemm.ee 18 points 6 months ago

Sweet 'lift bro

Is it pro-pane?

[-] Gormadt@lemmy.blahaj.zone 7 points 6 months ago

All our lifts run propane

I wish we'd switch to electric but that's not in the plans anytime soon

[-] Hugh_Jeggs@lemm.ee 5 points 6 months ago

They were diesel when I was driving them, fucking horrible!

Gas ones were a godsend!

[-] Gormadt@lemmy.blahaj.zone 1 points 6 months ago

Our shop still has a diesel lift and they have a forklift that was converted from diesel to propane

That diesel lift is shite

It's a tank but God damn is it stubborn

[-] ubergeek77@lemmy.ubergeek77.chat 10 points 6 months ago

I can't believe OP is actually forklift certified

[-] Gormadt@lemmy.blahaj.zone 8 points 6 months ago

Not only am I forklift certified I'm also one of the mentors certifying people and the sole forklift inspector at my work inspecting roughly 80 forklifts everyday.

It's pretty great NGL

[-] Aussiemandeus@aussie.zone 5 points 6 months ago

You can inspect 80 forklifts in a day? That's 10 every hour in an eight hour shift. That's 7.5 minutes a forklift every day all day.

Including prestart paperwork? Oil levels, belt conditions, operational check of each one and all the functions?

[-] AnUnusualRelic@lemmy.world 5 points 6 months ago

Boeing makes forklifts now, didn't you know?

[-] Gormadt@lemmy.blahaj.zone 2 points 6 months ago

Given the quality of the forklifts we have they definitely weren't built with such quality lol

Pretty much all the new lifts we got have all had little things that QA should have caught before they shipped. Bolts falling off, leaks that shouldn't be there, wiring issues, crossed hydraulic lines that result in inverted controls, etc.

It's pretty silly

[-] AnUnusualRelic@lemmy.world 2 points 6 months ago

crossed hydraulic lines that result in inverted controls

I'm not really familiar with those products, but that's the kind of thing where, unless you found it in a ditch somewhere, or bought it at a charity, it should go right back to the manufacturer. Then the manufacturer should go right on that big poster on the wall. The one that says "don't ever buy from those guys".

[-] Gormadt@lemmy.blahaj.zone 1 points 6 months ago

You'd think so but the bosses were like, "Well do they still work?"

And then kept the lifts

Apparently due to it though they reimbursed us the cost of fixing that but honestly I agree with you

If they missed something that obvious what the fuck else did they miss that's less obvious‽

[-] AnUnusualRelic@lemmy.world 1 points 6 months ago* (last edited 6 months ago)

Oh, right, I forgot you're in the US. You are in the US? Or are there other such places I ought to know of?

[-] Gormadt@lemmy.blahaj.zone 1 points 6 months ago

Yep I'm in the US

[-] Gormadt@lemmy.blahaj.zone 4 points 6 months ago

It's actually a little less time than that as I get 2 15 minute breaks during that 8 hours.

Checking the oil, coolant, hydraulic fluid, and the radiator for debris takes about 30 seconds. Add an extra few seconds to check the belt tension using the little jig I made and you get the hard part done in less than a minute. Most of the time saving here is from how I park the lifts and how I plot my path through them.

Checking the hydraulics for proper movement is fairly short as well and during that you can check the horn and lights.

The parking brake gets checked when you try to move the lift and so are the reverse alarms and reverse lights.

Checking the tank presence sensor is done on approach to the lift by disconnecting the tank latch before hopping on and attempting to start the lift, if it properly detects the disconnected latch it won't start.

Tire wear is checked on approach as well due to having a line painted on my boot that is just over an inch off the ground (if the tires have less tread than that they need new tires)

Checking for leaks is fairly quick as well as it's basically looking for wet spots on the lines and dots on the ground.

Logging the hours is done typically while the lifts auxiliary systems (that we add) are starting up.

The paperwork takes awhile though NGL

So in general I can get through all the lifts in about 5.5 hours and the paperwork takes the rest of my shift.

[-] Opisek@lemmy.world 2 points 6 months ago

That sounds stressful. Do you need to check this many or do you just do it because you're fast enough.

[-] Gormadt@lemmy.blahaj.zone 2 points 6 months ago

It can be pretty stressful at times but in general it's actually pretty chill. I don't have to worry about other people driving around me, I don't have to worry about hazardous materials, and I get to avoid one of my supervisors who has a skill of making everyone around them more stressed.

Especially considering the paperwork takes the rest of my shift regardless of how long the inspections take 😉

Unfortunately I do need to check all of them everyday. There's only a 6 hour gap between shifts where I work so I need to finish all of them in that time. And during the 18 hours the forklifts are in motion they're redlining the engines and doing 8mph. So basically each forklift drives about 150 miles a night.

[-] irmoz@reddthat.com 10 points 6 months ago
[-] Gormadt@lemmy.blahaj.zone 8 points 6 months ago

The smoothness of a new lift can't be understated vs a lift that has 10k+ hours of drive time on it

[-] evidences@lemmy.world 7 points 6 months ago

Last time we got a new reach truck at my job the first night I tripled the travel distance on the display.

[-] Gormadt@lemmy.blahaj.zone 4 points 6 months ago

This one in particular had a hydraulic leak straight from the factory but when it came back from our shop it broke a hundred hours before the week was out

[-] RicoBerto@lemmy.blahaj.zone 6 points 6 months ago

Looks a lot like the Unicarrier I drive every night.

Enjoy it while it lasts, the paint will be chipped in a day.

[-] Gormadt@lemmy.blahaj.zone 3 points 6 months ago

Oh our lifts get chipped hella fast

I've been working at this location for almost a decade now and this is the third wave of new forklifts that has happened in that time

[-] KISSmyOSFeddit@lemmy.world 6 points 6 months ago
[-] finalarbiter@lemmy.world 6 points 6 months ago

Didn't even have to click to know you linked Forklift Driver Klaus

[-] Gormadt@lemmy.blahaj.zone 3 points 6 months ago

This is literally one of the videos that my mentor showed me when I got trained

It wasn't in the official training docket but he felt it was necessary to show

And when I used to do training I also made sure to show it to people

Now though due to the inspections I do they don't let me train people and unfortunately it shows with how the new people work

They don't take safety as seriously as they should

[-] PipedLinkBot@feddit.rocks 2 points 6 months ago

Here is an alternative Piped link(s):

https://www.piped.video/watch?v=TJYOkZz6Dck

Piped is a privacy-respecting open-source alternative frontend to YouTube.

I'm open-source; check me out at GitHub.

[-] prex@aussie.zone 2 points 6 months ago

Why can't all induction videos be like this.

They played it when I got my ticket.

[-] Mr_Mofu@lemmy.blahaj.zone 5 points 6 months ago

Does this one come with heated seats?

[-] Gormadt@lemmy.blahaj.zone 4 points 6 months ago

Naw our lifts are pretty basic

[-] buzz86us@lemmy.world 4 points 6 months ago

Lift a crate of forks to be literal?

[-] nifty@lemmy.world 2 points 6 months ago
[-] Gormadt@lemmy.blahaj.zone 2 points 6 months ago

They run like silk, well the one's that weren't fucked from the factory lol

this post was submitted on 18 Apr 2024
206 points (100.0% liked)

196

16401 readers
2104 users here now

Be sure to follow the rule before you head out.

Rule: You must post before you leave.

^other^ ^rules^

founded 1 year ago
MODERATORS