28
Well that's a $70 fuck up... (files.catbox.moe)
submitted 2 months ago* (last edited 2 months ago) by Gormadt@lemmy.blahaj.zone to c/3dprinting@lemmy.world
8 comments fedilink hide all child comments

That's what I get for not checking my vat before starting a print right after another one.

Edit: For those that don't know there's supposed to be a nice little screen sized rectangle visible without the fancy looking lowercase "t" pattern.

The screen is broken and needs replacement. So does the FEP as it didn't fair too well either but I already have a few on hand just in case things go sideways.

Edit 2: For anyone who's curious the whole process took me 2 hours to complete. I went in blind and it's good as new if not better. Honestly it's working hella good to the point where I actually had to lower my exposure time because my stuff was now getting overexposed. It's amazing what a new FEP and LCD will do.

top 8 comments
sorted by: hot top controversial new old
[-] alleycat@lemmy.world 19 points 2 months ago

I don't own an SLA printer. Where is the fuckup?

[-] JackDark@lemmy.world 27 points 2 months ago

From context, I'm guessing that there were broken parts of the print in the back, obscured by the resin. When the bed came down to start the new print, it pushed the broken parts from the last one into the screen, breaking it.

[-] Gormadt@lemmy.blahaj.zone 12 points 2 months ago* (last edited 2 months ago)

Basically exactly what happened.

I didn't even notice the bits missing from the print as it was still being rinsed in the alcohol.

The head of one of the minis I was printing for a friend popped off and I didn't notice before starting the second batch of dudes and then CRUNCH $70 dollars for a new part to be on the way.

Edit: Unfortunately I'm familiar with the crunch of an LCD panel. I've broken a few but this is the first one on my resin printer. It lasted about a year before I broke it.

[-] ShepherdPie@midwest.social 4 points 2 months ago* (last edited 2 months ago)

Seems like the manufacturers should be able to take advantage of the stepper driver's current sensing and stop the movement if it detects a high load before the bed is all the way down and before it applies enough pressure to crack the screen.

With Trinamic drivers you can do sensorless homing using this same load sensing feature, though in your case you'd need a homing sensor to detect whether the bed actually made it all the way down.

[-] Gormadt@lemmy.blahaj.zone 4 points 2 months ago

Yeah my filament printers do sensorless homing (they're modded to frig) and it made me really wish my resin printer could do the same but there isn't an open source board I could swap in there (as far as I know) so I'm just going to have to keep being careful with my current resin printer.

[-] MolochAlter@lemmy.world 8 points 2 months ago

Oh oof, it happened to a friend of mine as well, not fun.

Not fun to fix, either.

[-] Gormadt@lemmy.blahaj.zone 5 points 2 months ago

Not looking forward to it that's for sure

I'll just have to add it to the list of things I'm fixing on Saturday

Hopefully it fits nicely in the schedule without much trouble

[-] wccrawford@lemmy.world 5 points 2 months ago* (last edited 2 months ago)

I think this happened to me as well. I had something pop my FEP film, and I replaced it, and tried a couple prints, but really didn't like the whole resin experience, so I sold my printer.

When the buyer got it home, he told me the screen was cracked. We weren't sure whether it happened in transit or not, and I'd given him a pretty great price on the thing with a washing machine and a ton of resin, so he decided he didn't want any money back.

After learning more about resin printers since then, I now think it was my fault and I feel bad about it. Either way, I've definitely learned to check the major components before buying or selling something.

this post was submitted on 08 Aug 2024
28 points (81.8% liked)

3DPrinting

15512 readers
223 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io

There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml

Rules

If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 1 year ago
MODERATORS
andypiper@lemmy.world
henry_rowengartner@lemmy.world
j4k3@lemmy.world
GrayBackgroundMusic@lemm.ee