68
Thermometer Holster (lemmy.world)
submitted 2 months ago by mipadaitu@lemmy.world to c/3dprinting@lemmy.world
9 comments fedilink hide all child comments

I have an indoor/outdoor thermometer to keep track of how hot the back of my Expedition gets. I drive pretty regularly with two dogs in the back, and over the summer and winter the temps can get a little extreme.

I need to be able to take it out to keep an eye on it remotely (it has about 1/4 mile range) but also have it not rolling around while I drive.

There was a coin holder there that I popped out, and used as a template for an insert to keep this mounted semi-permanently.

Printed with kinda crappy Amazon Basics PETG. If it holds up well, I'll reprint it with better quality black PETG so it matches the car better.

top 9 comments
sorted by: hot top controversial new old
[-] fuckwit_mcbumcrumble@lemmy.dbzer0.com 4 points 2 months ago

I'm curious how it holds up as well. I was printing a little deflector for my air vent out of regular PLA, and on an 85 degree day the PLA warped in just a couple of hours. I finally have a design I'm happy with, I just need to print in a better material and all I've ever printed in is PLA.

[-] Captnkrk69@lemmy.world 6 points 2 months ago

Try petg. It prints just as nice as pla. I run it full speed on a 5m no problem.

[-] fuckwit_mcbumcrumble@lemmy.dbzer0.com 2 points 2 months ago

I think I bought a spool of PETG a while back. I know I have two spools of ABS that I haven't touched yet, but that was very much for a reason. I'll be near micro center this weekend so I'll have to dig through my box of filament before then.

[-] mipadaitu@lemmy.world 2 points 2 months ago

We've had a couple 100 degree F days, and the thermometer read 110° a couple times, and the plastic seems to be fine (so far).

It's mostly out of the sun, since it's low on the dashboard, so I expect it'll hold up.

[-] fuckwit_mcbumcrumble@lemmy.dbzer0.com 1 points 2 months ago

Mine is sadly right in the window, but I might get tint at some point so that should help.

I see you have a window shade, but do you also have tint? On 100f days my interior gets well over 110 even with my shade up.

[-] Rozz@lemmy.sdf.org 1 points 1 month ago

I've made Car seat button pressers and chapstick holders for my car that gets plenty hot and have never had any problems with PLA. They are thicker prints so you might have problems with thinner prints or if you live in a hot climate. I live in a fairly hot in the summer and cold in the winter climate.

[-] Imgonnatrythis@sh.itjust.works 2 points 2 months ago

Looks nice. Silver works too as it matches the device. Pretty specific application, but urge you to share it somewhere - someone will find it useful.

[-] mipadaitu@lemmy.world 3 points 2 months ago

Yeah, the clip mount is actually the useful part, cause a few of the Fords since 2018 have the same coin holder, and people can use that as a basis for other options.

Once it's done I'll share that part, and maybe the whole thing as two separate files.

[-] raptore39@lemm.ee 1 points 2 months ago

I like this idea

this post was submitted on 29 Aug 2024
68 points (98.6% liked)

3DPrinting

15512 readers
223 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io

There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml

Rules

If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 1 year ago
MODERATORS
andypiper@lemmy.world
henry_rowengartner@lemmy.world
j4k3@lemmy.world
GrayBackgroundMusic@lemm.ee