56

I have an early 2000s house and they went wild with a) the sheer number of wall switches and b) the number of 3-way switches. I want to replace a good number of them while accepting my wife's requirement that they look and function as dumb paddle switches when necessary.

I've looked around and these seem to be the best at fitting all of my requirements but Mama Mia, the price ๐Ÿ˜ญ ๐Ÿ˜ญ ๐Ÿ˜ญ ๐Ÿ˜ญ

https://www.amazon.com/Inovelli-2-1-Smart-Switch-Dimmer/dp/B0BG329SH3

Anyone have some suggestions?

you are viewing a single comment's thread
view the rest of the comments
[-] sxan@midwest.social 20 points 5 months ago

I have tried every kind of switch, so trust me on this: go with z-wave.

  • for 3-way replacements, get these. You may have to rewire the dumb second switch, but you won't have to replace it, because this switch works with dumb second switched. If you want to update the dumb switch, these are awesome simply because of how easy they are to install.
  • This switch is fantastic for being able to pack a ton of functionality into a single switch, controlling non-switch-wired devices like smart lightbulbs, fireplaces, garage doors, and so on. There are a couple of HA templates that make programming easier. Not only are there a lot of buttons, but each can be programmed to respond to single, double, or triple clicks, or long-presses. You'll never use all of the functions.
  • I got one of these as a controller and have not had any problems with it. It works well with zwave2js. I did try once to connect it to find ZigBee devices a previous owner left laying around, and never got them to work, but as I understand it Zigbees a big more flakey. I assume with enough diligence it'd be fine.

I really really like those Eva Logik switches. The fact that they work in 3-way configuration with existing switches makes things so much easier - and cheaper.

[-] TVA@thebrainbin.org 9 points 5 months ago

For that second bullet point you can get them a smidge cheaper at thesmartesthouse

They've got a sale going on, might be worth looking into, but, sxan has really good points with his first bullet point

[-] sxan@midwest.social 1 points 5 months ago

Fantastic resource!

[-] afk_strats@lemmy.world 2 points 5 months ago

Noted.. Very good call ours. Thanks for all the details.

[-] ShepherdPie@midwest.social 5 points 5 months ago* (last edited 5 months ago)

I'll second what they said about ZWave and their recommended switches.

I have that same Zooz scene controller in the kitchen and it works great to control the kitchen lights and the RGBW cabinet lighting I installed. For 'normal' smart switches, I'm using the dimmer and on/off Zooz switches (~~Zen32 and 34 I think?~~ Zen72 & 76) which are about half the price of that Innovelli.

I used the HUSBZB in the past and it did work, but it's also pretty dated and hard to update so I went with the Sonoff 3.0 USB dongle (zigbee) and Zooz ZST10 dongle (zwave) and have had a trouble free experience.

[-] afk_strats@lemmy.world 1 points 5 months ago

Ok. I also have the Sonoff 3.0 and it seems good so far. Might need to add that ZST to the cart

[-] tburkhol@lemmy.world 1 points 5 months ago

Just want to me-too Ruaidbrigh's reco's and to point out, as a long-time homeowner, that you don't have to do all the renovations at one time. For me, at least, there's a big difference between spending $1000 to replace all the switches in the house and spending $100 to replace a couple switches every month or so. Big difference between spending the whole weekend re-wiring switches and a quick after-coffee task.

[-] sxan@midwest.social 1 points 5 months ago

This is such good advice. You replace the switches one at a time, when you realize that it'd be nice to have that thing automated. Trying to do it all at once... that's eager optimization. It's overwhelming, and you'll end up replacing switches that you never use.

The exception is switch panels; my house has a couple 3- and 4- switch panels. When one of those wants automating, I give it a good, hard think about doing all of them while I'm in there.

But the bite-size advice is gold.

[-] turmacar@lemmy.world 1 points 5 months ago* (last edited 5 months ago)

FWIW with zigbee I've had better luck with zigbee2MQTT and then using MQTT. If nothing else it made it a lot clearer what was/wasn't a router and what was just and end device than the native zigbee integration. ( I was getting very frustrated with a less capable no-neutral wall switch. )

Might just be placebo but it feels like there are cheaper/longer batterylife zigbee sensors than there are zwave.

this post was submitted on 14 Jan 2025
56 points (98.3% liked)

homeassistant

15116 readers
2 users here now

Home Assistant is open source home automation that puts local control and privacy first.
Powered by a worldwide community of tinkerers and DIY enthusiasts.

Home Assistant can be self-installed on ProxMox, Raspberry Pi, or even purchased pre-installed: Home Assistant: Installation

Discussion of Home-Assistant adjacent topics is absolutely fine, within reason.
If you're not sure, DM @GreatAlbatross@feddit.uk

founded 2 years ago
MODERATORS