What motherboard should I use for a DIY NAS? (lemmy.zip)

submitted 2 weeks ago by stoy@lemmy.zip to c/sysadmin@lemmy.world

20 comments fedilink hide all child comments

I posted last week about building a NAS, and on friday I saw that the Jonsbo N4 case I had been eyeing for a while was in stock at a good price.

So now I am looking for a motherboard to base my system on, which seems to be a bit difficult.

I need an mATX or ITX board that can handle six SATA drives and also have an NVME slot for a boot drive.

Performance, I value power efficiency more than super high performance, and am on the fence between Open Media Vault or TrueNAS, I like the familiarity of Linux, but I do value the features of ZFS.

If I end up on TrueNAS I may run a VM in the hypervisor from time to time, mostly just for testing.

The NAS will not be an HTPC, but will serve media through SMB and possibly NFS later.

Cooling could be a bit of an issue as the case does not have a lot of space for a cooler

you are viewing a single comment's thread
view the rest of the comments

[-] stoy@lemmy.zip 0 points 2 weeks ago

As it is right now, I have zero redundancy, just my media spread across two HDDs, a future plan is to have two NAS units, the primary unit that I access from my machine as normal, and a separate unit that runs rsync or borgbackup from the primary unit every night.

At this moment I don't want perfect being the enemy of good.

[-] Dran_Arcana@lemmy.world 0 points 2 weeks ago

I run clusters of both LSI-based hwraid and zfs at work. I strongly recommend zfs over hwraid. The long and short of it is hwraid hasn't kept up with software solutions, and software solutions are often both more performant and more resilient (at the cost of CPU/memory).

For homelab scale, zfs is definitely the way to go, especially for archive data.

Wendel wrote up a pretty good guide for those looking to understand what makes zfs so good if you want to dive deeper. https://forum.level1techs.com/t/zfs-guide-for-starters-and-advanced-users-concepts-pool-config-tuning-troubleshooting/196035

[-] stoy@lemmy.zip 0 points 2 weeks ago

Yeah, I am a bit weary of hwraid since I have no experience with it, I have some experience with software raid.

My initial plan was going with Linux set up an mdadm raid and run an LVM on top of it, though the more I think about it, it feel like more of a lab/experiment scenario, snd I may get another NAS build to lab with.

As it stands now, I'll probably go with TrueNAS and ZFS since it will be running in "prod" at home.

[-] hperrin@lemmy.ca 1 points 1 week ago

I’d recommend ZFS or Btrfs over mdadm. They both have data repair if something goes wrong, and mdadm doesn’t.

this post was submitted on 13 Apr 2025

2 points (100.0% liked)

Sysadmin

8845 readers

1 users here now

A community dedicated to the profession of IT Systems Administration

No generic Lemmy issue posts please! Posts about Lemmy belong in one of these communities:
!lemmy@lemmy.ml
!lemmyworld@lemmy.world
!lemmy_support@lemmy.ml
!support@lemmy.world

founded 2 years ago

MODERATORS

DarraignTheSane@lemmy.world

00Lemming@lemmy.world

L3s@lemmy.world