54
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
this post was submitted on 16 Jul 2025
54 points (100.0% liked)
Technology
39750 readers
480 users here now
A nice place to discuss rumors, happenings, innovations, and challenges in the technology sphere. We also welcome discussions on the intersections of technology and society. If it’s technological news or discussion of technology, it probably belongs here.
Remember the overriding ethos on Beehaw: Be(e) Nice. Each user you encounter here is a person, and should be treated with kindness (even if they’re wrong, or use a Linux distro you don’t like). Personal attacks will not be tolerated.
Subcommunities on Beehaw:
This community's icon was made by Aaron Schneider, under the CC-BY-NC-SA 4.0 license.
founded 3 years ago
MODERATORS
I can change what an individual print line looks like to the naked eye just by something as simple as tweaking temperature or print speed. Good luck getting anything remotely consistent intentionally by clever nozzle machining.
Also, nozzles are dead simple to make, it's literally just a large drill bit (1.75mm diameter or so) with a smaller (.05mm to 1mm) drill poking the last bit through. Tip is slightly flattened off and away it goes.
Also, as someone else said, nozzles are a wear item, it's like trying to track a car down by the brake pads, or a pencil down by the shape of the lead at the tip, using it changes the characteristics of it.