Edit: It works! Not beautiful and shows a concerning amount of "Error" lines on startup but it will do. I got VSCodium and ESP-IDF running, at least – and CMake isn't awfully slow despite it being a crappy 4GB RAM machine (not easily upgradeable). The first boot took a while and I haven't rebooted since, I guess it will be below 30 seconds next time (Mint on same machine but HDD was about 1 minute).
Edit: I hope I chose the right kernel here, surprisingly not much info online on this! Also, I picked "targeted" because the 10-year-old system does not use any cutting-edge hardware and all drivers should be auto-detected, I think.
After some experience with Linux Mint, I gathered the courage to try another distro. I'd like to turn an old laptop into an IPTV receiver plus FTP/OpenVPN/HomeAssistant server with occasional desktop use. I first installed Windows 11 just in case my family needs to use it (it fucking sucks, the built-in PS/2 keyboard doesn't work half the time but that's an issue for later) but now I'll be turning it into a dual-boot setup with Debian as the primary option. Please give me some encouragement, I'm really afraid of new things.
Old pic: https://lemmy.ml/pictrs/image/d4bf0222-4fc1-42ab-a3e9-464087dec3af.png
Raspberry Pi is expensive and does not come with a UPS. I already have this mediocre laptop. The Pi cost may recoup itself on the electricity bill but I'm not happy about booting from an SD card.
The only lid problem is that the BIOS of this laptop does not allow turning on with the lid closed (also, there is no Power-on-AC) but I might hack it with a magnet.
Thanks. Maybe another pro is, that it also comes with a screen, if ssh fails.
I mean, the good old dumb 32" LCD TV should be the primary screen. But maybe mom will want to watch in another room sometimes, in which case she can pull out the laptop and use her familiar IPTV client.
Yeah, I probably wouldn't buy a new laptop for a server, but it's a great way to re-use what would otherwise be e-waste. I have a 20 year old laptop running as a server, currently just for FoundryVTT, but it works great. 4GB of DDR2 ram, Intel celeron dual core cpu. I stuck a new ssd in it (old hdd died) and it works great, as long as I don't run any graphical interfaces while I have the server running. One ram stick was bad, but DDR2 cost me about $11. Total hardware cost was around $50 USD.
Thinking about just removing the lid entirely, since I don't use it graphically (I can hook up a monitor if absolutely needed).
You can run your Pi's from an sata SSD, I've never used SD successfully long term. The lid. Maybe you could tell OS not to shut down when you close the lid and set it never to sleep or turn off? Used that on an old HP laptop (intel 6th gen) with broken screen, KDE, Jellyfin server. Might be worth a look Edit: in power settings..