2
submitted 1 year ago* (last edited 1 year ago) by lordnikon@lemmy.world to c/mechanicalkeyboards@lemmy.ml

modern model M's do they live up to the hype?

you are viewing a single comment's thread
view the rest of the comments
[-] sharktastica@lemmy.world 1 points 1 year ago

They're not 6KRO. All Model Ms are membrane keyboards, which make implanting diodes difficult, so they're fundamentally 2KRO.

[-] lordnikon@lemmy.world 1 points 1 year ago

to clarify this is the new model m from unicomp not an OG model m. I have the new model m right in front of me and can confirm it's 6KRO

[-] sharktastica@lemmy.world 1 points 1 year ago* (last edited 1 year ago)

I also have a New Model M. It uses the same matrix Unicomp has used for years with their Ultra Classic and EnduraPro keyboards. As such, you should be able to observe 2KRO by pressing any 3 WASD keys together (and see my matrix simulator to find more examples).

I don't mean to sound like an arsehole, but it's not a matter of debate; a conductive membrane using a key-matrix is practically limited to 2KRO. You'd either need to stick diodes in (which is harder and not cost-effective to do with membranes versus PCBs) to prevent back current from ghosting keys, or you'd need dedicated traces for each switch position instead of using a matrix (which is costly in traces and the design of controller you'd need for that). Because neither is a practical option, the controller must block keys susceptible to ghosting because not sending all intended keys is preferable to reporting keys not even being pressed. In a key-matrix without diodes, 2 is the maximum number of any given keys guaranteed to be reliably sensed and reported together, thus Model Ms (like most membrane keyboards) are 2KRO. That doesn't mean more keys can be pressed under certain situations - the matrix is like a table of traces, having columns and rows and what combinations are being used matters - but it doesn't change that key rollover means the maximum guarantee across all keys and the number in this case is 2. Not the maximum possible key combination under any condition. I think that part is what confuses a lot of people (which is understandable, I've seen it misrepresented for marketing and used as a buzzword). But, Deskthority Wiki describes as such which is probably generally easier to understand:

2KRO is often used to describe a keyboard with blocking, and is meant to be read as "any combination of two keys are guaranteed to work, and some combinations of three or more keys will work, but others will not".

I'd be surprised if this is not the case with your keyboard. With the Unicomp Mini M, they improved supported combinations by making the matrix larger (from 16x8 for New M to 16x12) and then using maths you can find out where in the matrix the most commonly used keys should go, but you can still observe 2KRO on a Mini M by trying to press any 3 arrow keys down.

this post was submitted on 04 Jul 2023
2 points (100.0% liked)

Mechanical Keyboards

8877 readers
8 users here now

Are you addicted to the clicking sounds of your beautiful and impressive mechanical keyboard?
If so, this community is for you!

Here you can discuss everything about mechanical keyboards (and only mechanical keyboards).

Banner by Jay Zhang on Unsplash

founded 4 years ago