551
submitted 1 year ago by Gsus4@feddit.nl to c/technology@lemmy.world

Engineers at MIT and in China are aiming to turn seawater into drinking water with a completely passive device that is inspired by the ocean, and powered by the sun.

In a paper appearing today in the journal Joule, the team outlines the design for a new solar desalination system that takes in saltwater and heats it with natural sunlight.

The researchers estimate that if the system is scaled up to the size of a small suitcase, it could produce about 4 to 6 liters of drinking water per hour and last several years before requiring replacement parts. At this scale and performance, the system could produce drinking water at a rate and price that is cheaper than tap water.

https://www.cell.com/joule/fulltext/S2542-4351(23)00360-4

you are viewing a single comment's thread
view the rest of the comments
[-] Spzi@lemm.ee 14 points 1 year ago

What's wrong with desalination research? Water is essential to life, and most water on Earth is salinated. The practical value of this research is apparent, both for ships on sea and coastal regions. So I don't see how these attempts are "worthless", and how it would be bad if they receive more "free money".

The article talks about what could have been a challenge faced by the junkyard scrap model, and how they solved it:

Each stage contained an evaporator and a condenser that used heat from the sun to passively separate salt from incoming water. That design, which the team tested on the roof of an MIT building, efficiently converted the sun’s energy to evaporate water, which was then condensed into drinkable water. But the salt that was left over quickly accumulated as crystals that clogged the system after a few days. In a real-world setting, a user would have to place stages on a frequent basis, which would significantly increase the system’s overall cost.

In a follow-up effort, they devised a solution with a similar layered configuration, this time with an added feature that helped to circulate the incoming water as well as any leftover salt. While this design prevented salt from settling and accumulating on the device, it desalinated water at a relatively low rate.

In the latest iteration, the team believes it has landed on a design that achieves both a high water-production rate, and high salt rejection, meaning that the system can quickly and reliably produce drinking water for an extended period. The key to their new design is a combination of their two previous concepts: a multistage system of evaporators and condensers, that is also configured to boost the circulation of water — and salt — within each stage.

I'm not sure how much money is in desalination, but it's certainly an industry. If a group comes up with a new method, and then nothing happens with it, it's probably because it's either not that great after all, or not that cost effective.

Maybe a problem is that the countries where it's needed the most are not exactly the richest countries: https://ourworldindata.org/water-use-stress#what-share-of-freshwater-resources-do-we-use

several countries across the Middle East, North Africa & South Asia have extremely high levels of water stress. Many, such as Saudi Arabia, Egypt, United Arab Emirates, Syria, Pakistan, Libya have withdrawal rates well in excess of 100 percent — this means they are either extracting unsustainably from existing aquifer sources, or produce a large share of water from desalinisation.

[-] orrk@lemmy.world 1 points 1 year ago

you know, if you build a large solar still, you just have to flush it every couple cycles to deal with the salt, and it can be as big as you can make a warehouse...

[-] assassin_aragorn@lemmy.world 0 points 1 year ago

How do you know that you're flushing out all the salts with each flush? Are you able to reach every part of the reservoir with the flush? Even if you can, what do the flow patterns look like -- are there dead zones with no flow?

It really isn't as simple as you describe, although I really wish that it was.

[-] orrk@lemmy.world 3 points 1 year ago

So the fun part is, all of what you mentioned, doesn't matter, because you don't actually need to get every bit of salt out of the reservoir, so you just flush out a good deal of it with more salt water!

you read this paper and its complexities and assumed that the things mentioned are inherently important to the functioning of the system, but like the Tesla-trucks and acceleration, they really aren't.

all you need for the system to work is liquid, as long as there is more osmotic pressure pulling the water away from the salt than the hydrogen bonds produce.

low tech, easy to scale, and already being done

[-] assassin_aragorn@lemmy.world 1 points 1 year ago

Yes and no. I get what you're saying. No wash is 100% efficient, nor does it have to be. It's just going to set the number of runs the unit can do before it needs to go offline for more intensive cleaning. Short run times though lead to more expensive operation. What this work does is increase the run time by more efficiently removing salt.

Do you get what I mean? Long term salt buildup is going to cause problems, and the more slowly you can make that happen, the better.

[-] orrk@lemmy.world 1 points 1 year ago
[-] assassin_aragorn@lemmy.world 1 points 1 year ago

What does that have to do with anything?

[-] orrk@lemmy.world 2 points 1 year ago

limestone deposited by water leads to a hard, not easy to remove build up as it will not readily redissolve into any water, unlike salt, that will gladly let its self be dissolved via osmotic pressure until the maximum salinity of water is reached

seawater for example has around 34-35 ppt salt, water is satisfied at around 260ppt, meaning that one saltwater flush of the system will clean out basically all the salt of like 7 prior runs

this post was submitted on 28 Sep 2023
551 points (97.3% liked)

Technology

59583 readers
3442 users here now

This is a most excellent place for technology news and articles.


Our Rules


  1. Follow the lemmy.world rules.
  2. Only tech related content.
  3. Be excellent to each another!
  4. Mod approved content bots can post up to 10 articles per day.
  5. Threads asking for personal tech support may be deleted.
  6. Politics threads may be removed.
  7. No memes allowed as posts, OK to post as comments.
  8. Only approved bots from the list below, to ask if your bot can be added please contact us.
  9. Check for duplicates before posting, duplicates may be removed

Approved Bots


founded 1 year ago
MODERATORS