Its printing PLA and you could smell it very strongly and was super cool to see
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io
There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
I don't feel like I've seen armature (SCARA?) Based 3d printers in this scale before. I imagine it might be due to it losing reach as it goes on comparison to a gantry? At least without some sort of rising mechanism.
My guess is cost and size. Those robots aren't cheap and need a cell around them (the yellow device screwed to the table edge). To make it worse as they put a lot of weight on a small footprint you might need to locally reinforce the foundation. Additionally, the printer needs likely 2x or even more floor space compared to the build plate/print volume.
They do exist. For example, a maker space in southern Germany has one of those on display. Not due to it being practical but because they got their hand on a robot and tinkered with it.