76
you are viewing a single comment's thread
view the rest of the comments
[-] j4k3@lemmy.world 6 points 11 months ago

Take apart any old switch mode power brick, rip off the transformer and unwind the enameled copper wire. Use an Xacto knife to carefully and completely remove the enamel from the entire circumference and test if it wets with solder in 360° before adding it as a replacement.

For my own etched designs that need mechanically solid through holes and for repairs/mods where I need to make a soldering contact, I keep a set of brass micro rivets. The smallest ones I have are 0.9mm and work great with a 1mm hole in the PCB. If you've never seen or tried this, no special tools are needed. Place the rivet in the hole and use a pointy object like a dental pick to expand the back side.

this post was submitted on 26 Nov 2023
76 points (95.2% liked)

ErgoMechKeyboards

5686 readers
1 users here now

Ergonomic, split and other weird keyboards

Rules

Keep it ergo

Posts must be of/about keyboards that have a clear delineation between the left and right halves of the keyboard, column stagger, or both. This includes one-handed (one half doesn't exist, what clearer delineation is that!?)

i.e. no regular non-split¹ row-stagger and no non-split¹ ortholinear²

¹ split meaning a separation of the halves, whether fixed in place or entirely separate, both are fine.
² ortholinear meaning keys layed out in a grid

No Spam

No excessive posting/"shilling" for commercial purposes. Vendors are permitted to promote their products/services but keep it to a minimum and use the [vendor] flair. Posts that appear to be marketing without being transparent about it will be removed.

No Buy/Sell/Trade

This subreddit is not a marketplace, please post on r/mechmarket or other relevant marketplace.

Some useful links

founded 1 year ago
MODERATORS