24
Building a Bento Box
(lemmy.dbzer0.com)
I got a P1S for my family as an early Christmas present. I'm interested in creating parts that may eventually be used in cars, so I'm trying to get things ready for full-time ABS and ASA production.
This is my 4th print using ABS. First time was an okay benchy which needed some flow calibration and displayed some slight bowing at the base. Second time was a good benchy which seemed dialed in. Third print was an articulated Onyx Pokemon which seemed great.
I've printed the main body for the bento box in 3DF transparent black ABS.
Some of my tweaked settings for success were:
- Blanket over the printer. This is in my garage and temperatures dip. The blanket helped with the warping.
- Setting the bed temp to 100C and setting the level to around 40mm down from the top with the chamber fan at 30%. Did this for around 15 minutes to get everything inside up to temperature.
- Nozzle temp first layer of 260C
- Nozzle temp other layers of 270C
- Bed temp constant 100C
I plan on printing the other components and sourcing the parts spread out across December, so I'll post updates!
Beyond filament, the materials used in most 3D printers aren’t food safe either. PTFE tubing to guide the filament, brass nozzles and gears.
Also, the biggest issue are the micro cavities between the layers that can host germs even if you wash it.
Yup, I'd only trust this as shelf art.