967
submitted 1 year ago by denissimo@feddit.de to c/linux@lemmy.ml

For context, LDAC is one of the few wireless audio codecs stamped Hi-Res by the Japan Audio Society and its encoder is open source since Android 8, so you can see just how long Windows is sleeping on this. I'm excited about the incoming next gen called LC3plus, my next pair is definitely gonna have that.

you are viewing a single comment's thread
view the rest of the comments
[-] denissimo@feddit.de 9 points 1 year ago

Yes, LDAC and multipoint do not mix hence I'm looking forward to LC3plus that replaces it. To be fair it's not a big issue to roll back to AAC or even SBC to use multipoint, because you probably aren't gonna notice a difference when you don't listen to high res apps like Tidal. It also should be known that a good codec does not fix mediocre drivers and/or chips. Regardless, Linux shines in letting you use a feature you did pony up for. :)

[-] nottheengineer@feddit.de 4 points 1 year ago

AAC hurts my ears. Not sure why since I can't hear a difference between it and LDAC without listening very carefully, but after half an hour or so I need to switch it to something else because it becomes more and more uncomfortable.

Switching between LDAC/multipoint mode means rebooting the headphones and connecting them again, so it's a massive hassle. That makes multipoint absolutely useless to me. I personally won't be buying sony headphones (or anything else that comes with an app) in the future because of that.

[-] InverseParallax@lemmy.world 2 points 1 year ago

Aac has a higher frequency response and I think some decoders don't filter transients as well with a fir filter. I've noticed this too.

[-] oeightsix@lemmy.nz 3 points 1 year ago

LDAC and Multipoint do in fact mix, just not on Sony products.

[-] denissimo@feddit.de 2 points 1 year ago

I see, so Edifier and Soundcore shall do some homework as well: LDAC and multi point don't work there either.

[-] oeightsix@lemmy.nz 4 points 1 year ago

Have a look at Technics A800/AZ60/AZ60MK2/AZ80, all support simultaneous use of LDAC and multipoint. I recall something else working with both simultaneously too, possibly Huawei TWS.

They do step down a quality tier to do so, and low bitrste LDAC is generally considered poor, but it's otherwise all there and possible.

[-] marmarama@lemmy.world 2 points 1 year ago

I have a Radsone ES100 Bluetooth DAC/headphone amp, and that supports LDAC, multipoint, and doesn't compromise the LDAC bitrate when you have multipoint enabled. You can even leave it plugged in as a USB DAC and still use multipoint BT with LDAC, and it switches smoothly between the sources depending on which device started playing a stream most recently.

I was distinctly underwhelmed by the BT implementation when I got my Sony XM4s, it's kinda weak by comparison.

[-] oeightsix@lemmy.nz 1 points 1 year ago

Nice one!

I am distinctly underwhelmed in general by the XM4.

[-] marmarama@lemmy.world 2 points 1 year ago* (last edited 1 year ago)

Yeah, I agree.

I bought them for their noise cancelling primarily, and they're excellent at that, but otherwise they're not great. The un-EQed frequency response is terrible for headphones in their price range: flabby, wildly over-exaggerated bass and no mids at all. Running without EQ I can barely hear lyrics - every singer sounds like they're mumbling underwater. I've had $20 IEMs with better tonal balance. They respond well to EQ but the on-board EQ doesn't have enough frequency bands to even come close to fixing them. Wavelet on Android doing EQ duty makes them listenable. Even when you do EQ them properly, they still sound a bit dull and lifeless.

No idea how they got so much praise when they were launched. The power of marketing budgets I guess. For a while I was gaslighting myself thinking I had a faulty pair or maybe there was something going wrong with my hearing, but having heard another pair, and doing comparisons with my other headphones - most of which are far cheaper - I realised that no, they're just not very good as headphones.

[-] oeightsix@lemmy.nz 1 points 1 year ago

I agree wholeheartedly and would add 'borderline unusable for voice calls' to the XM4's sins, which is admittedly an improvement over 'entirely unusable for voice calls' ala XM3/XM2/1000X. Spent quite a while trying to get the XM4 to sound 'good', and they just won't.

The 1000X series has reached a level of critical mass otherwise only touched by AirPods in consumer headphoneland - people have heard of them, and want them, and read reviews which say 'best for most people', and their friends recommend them, and they want them more. And they buy them, and 5 stars A+++ these are the best headphones they've ever heard. Which is their truth. Meets the expectations of most, and exceeds for those who haven't experienced top-tier ANC before.

Credit where it is due, Sony managed to make a product with a traditional Japanese letter-letter-number-number model, and made it famous enough to ask for by name. It is the consistency in product and marketing plus the halo effect that's seen 1000X series reach critical mass. Reviews saying 'actually I don't like how these sound and struggle to get them sounding much better with the rubbish in-app EQ that doesn't have a slider corresponding to the ~200Hz spike' aren't common.

We live in a world where AirPods and Spotify are good enough for most people. I'm just glad there's room in the market for well-tuned over-ear ANC cans too.

[-] rotopenguin@infosec.pub 2 points 1 year ago

Oh LDAC conflicts with mutli-connection? That's why I can't get it on my 1000xm4?? It's good to finally have an answer.

[-] Dreadful6644@lemmy.world 1 points 1 year ago* (last edited 1 year ago)

On my headphones, you can either use LDAC with one device or SBC/AAC with two devices. I can only change it via the app. Is there a similar setting for you?

[-] rotopenguin@infosec.pub 1 points 1 year ago

The ios app is the only way that I can command the headphones to connect to a second device. When 2 device mode is going on, I have no idea what the connection is like in ios but Linux plainly tells me that it can only do SBC and SBC-XQ. When I turn off 2 device mode, and pair it again, LDAC is finally offered. My 1000xm4 doesn't offer AAC, I don't think I have anything around that sinks AAC. My Steamdeck can work as an Opus sink lol.

this post was submitted on 17 Jul 2023
967 points (98.1% liked)

Linux

48376 readers
982 users here now

From Wikipedia, the free encyclopedia

Linux is a family of open source Unix-like operating systems based on the Linux kernel, an operating system kernel first released on September 17, 1991 by Linus Torvalds. Linux is typically packaged in a Linux distribution (or distro for short).

Distributions include the Linux kernel and supporting system software and libraries, many of which are provided by the GNU Project. Many Linux distributions use the word "Linux" in their name, but the Free Software Foundation uses the name GNU/Linux to emphasize the importance of GNU software, causing some controversy.

Rules

Related Communities

Community icon by Alpár-Etele Méder, licensed under CC BY 3.0

founded 5 years ago
MODERATORS