submitted 2 years ago by nogooduser@lemmy.world to c/homeassistant@lemmy.world

10 comments fedilink hide all child comments

I run HA in Docker and I have set up Mosquito MQTT and Zigbee2mqtt in other containers.

I can add Zigbee devices into Zigbee2mqtt and they automatically turn up in the MQTT integration. The problem is that they usually don’t have the control entities in HA. This means that I can’t activate switches by clicking on them in HA.

Everything else seems to work. I can turn the devices on and off in Zigbee2mqtt and I can do the same from Node Red (running in another container) with the Zigbee2mqtt plugin.

Has anyone else seen this problem?

I found something in GitHub about it but the comments said that it was fixed in the next version but I have a later version than that but it’s still not working.

you are viewing a single comment's thread
view the rest of the comments

[-] lossanarch@lemmy.world 3 points 2 years ago

Fairly sure this is a regression in the current release, i just ran into the same thing after upgrading to 1.34 and went back to 1.31.1

[-] nogooduser@lemmy.world 2 points 2 years ago

Downgrading to 1.31.1 fixed it. Thanks a lot.

[-] nogooduser@lemmy.world 1 points 2 years ago

Ok, thanks. I’ll have a look at switching to an older version.

this post was submitted on 01 Jan 2024

13 points (93.3% liked)

homeassistant

15348 readers

82 users here now

Home Assistant is open source home automation that puts local control and privacy first.
Powered by a worldwide community of tinkerers and DIY enthusiasts.

Home Assistant can be self-installed on ProxMox, Raspberry Pi, or even purchased pre-installed: Home Assistant: Installation

Discussion of Home-Assistant adjacent topics is absolutely fine, within reason.
If you're not sure, DM @GreatAlbatross@feddit.uk

founded 2 years ago

MODERATORS

GreatAlbatross@feddit.uk

greatalbatross@lemmy.world