ZigBee RGB Lightbulb w/o 3rd party app (lemmy.ml)

submitted 10 months ago by guttermonk@lemmy.ml to c/homeassistant@lemmy.world

9 comments fedilink hide all child comments

Any recommendations for a ZigBee RGB Lightbulb w/o 3rd party app - at least not a closed source app.

I heard the Phillips Hue works well but I'd like to be able to install and configure the bulbs with Home Assistant (or another open source app at a minimum). Any suggestions?

you are viewing a single comment's thread
view the rest of the comments

[-] static128@lemmy.world 5 points 10 months ago* (last edited 10 months ago)

I'm using both IKEA and Hue bulbs without having used any of the original apps/hubs (though I do use the deCONZ/Phoscon hub addon, not the Home Assistant ZHA but if you're device is listed as compatible the experience should be the same.

Edit: apparently you can re-pair without a remote, see below comment: ~~One thing to note about the Hue bulbs (without a Hue hub) is that you need one of the remotes to reset bulbs after already being paired so they can be re-paired to a hub,~~ where as the IKEA only need the power turned off and on a number of times to enter pairing mode.

[-] jgkawell@lemmy.world 3 points 10 months ago

I actually ran into this just the other day on some refurbished Hue bulbs. I was able to reset then without any remote or app using this method. Just make sure to do it 2-3 times in a row or until the bulbs start flashing.

[-] static128@lemmy.world 1 points 10 months ago

Thanks for the heads up

this post was submitted on 04 Jan 2024

17 points (100.0% liked)

homeassistant

11921 readers

48 users here now

Home Assistant is open source home automation that puts local control and privacy first. Powered by a worldwide community of tinkerers and DIY enthusiasts. Perfect to run on a Raspberry Pi or a local server. Available for free at home-assistant.io

founded 1 year ago

MODERATORS

GreatAlbatross@feddit.uk