45
Lines in prints (lemmy.world)
submitted 10 months ago by root@lemmy.world to c/3dprinting@lemmy.world
22 comments fedilink hide all child comments

Just about all of my prints have these lines at around the same heights, and I can't figure out why. I tried changing the nozzle, changing the layer height from 0.15 to 0.12, and changing the speed from 60mm to 40mm. All of these seemed to have helped a bit, yet they remain. I was thinking maybe as the prints get to a certain height, the shaking of the bed (Prusa MK2) caused the layers to be slightly offset perhaps. Anyone have any other ideas?

you are viewing a single comment's thread
view the rest of the comments
[-] hostops@sh.itjust.works 3 points 10 months ago

https://www.simplify3d.com/resources/print-quality-troubleshooting/lines-on-the-side-of-print/

Or maybe this:

https://www.simplify3d.com/resources/print-quality-troubleshooting/blobs-and-zits/

[-] root@lemmy.world 1 points 10 months ago

Thank you!

this post was submitted on 12 Jan 2024
45 points (97.9% liked)

3DPrinting

15541 readers
69 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io

There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml

Rules

If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 1 year ago
MODERATORS
andypiper@lemmy.world
henry_rowengartner@lemmy.world
j4k3@lemmy.world
GrayBackgroundMusic@lemm.ee