9
Question about horizontal lines (gantry) (lemmy.world)
submitted 10 months ago by root@lemmy.world to c/3dprinting@lemmy.world
10 comments fedilink hide all child comments

I had previously posted about some horizontal line issues I've been having, and I tried a lot of the suggestions I got; Unfortunately the issue persists.

I saw a video today, where someone mentioned that these connections that are basically responsible for raising and lowering the printer head should be somewhat loose, and not tight (as I had them).

Does anyone know if this is true? The video creator said that it is to allow for some 'forgiveness' between the two screws that drive the printer head up and down.

you are viewing a single comment's thread
view the rest of the comments
[-] root@lemmy.world 1 points 10 months ago

Thanks so much for all the pointers! 1, 3, 4 I will give them a try. I'll have to see how to disconnect the threaded rod from the motor so that I can roll it on a surface (I've done similar with arrows in the past).

For 2, the top is open, nothing was modified. This printer was bought used years ago (maybe 4-5 years ago) and used to print perfectly. It was not used for the last 3 or so, and has gone through several moves. When we unboxed it again, there were a few broken parts that we had to reprint (the upper stabilizers that go around the support rod and threaded rod, and the y axis motor mount in the back). So it's not inconceivable to think one or both of the rods could have been bent as well.

[-] rambos@lemm.ee 1 points 10 months ago

No problem, hope you find the cuse. Oh broken parts...I would inspect all mechanics and obviously clean and relube

I dont think you can remove threaded rod from your motor, but im not 100%. There are motors with motor coupler connecting to threaded rod (which can be simmilar issue if you dont leave a tiny gap between motor shaft and rod).

[-] root@lemmy.world 1 points 10 months ago

Thanks, I'll give it some proper TLC soon and clean/ lube everything.

this post was submitted on 13 Jan 2024
9 points (90.9% liked)

3DPrinting

15571 readers
35 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io

There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml

Rules

If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 1 year ago
MODERATORS
andypiper@lemmy.world
henry_rowengartner@lemmy.world
j4k3@lemmy.world
GrayBackgroundMusic@lemm.ee