127

want to get started but finding the technical side really overwhelming (sh.itjust.works)

submitted 10 months ago by funkless_eck@sh.itjust.works to c/piracy@lemmy.dbzer0.com

61 comments fedilink hide all child comments

I'd really like to get started with this stuff but finding the technical requirement exhausting.

Trying to install privoxyvpn- "simply add the proxy to your browser and ensure the configuration is correct" (no help as to what this means, or how to do it and following the basic instructions just renders my browser unable to connect - googling the error message gives me replies like "simply make sure you read the logs" (no description of how to get to the logs or how to read them)

hearing I need a proxy and a reverse proxy, install SWAG — "first, point the A name at your server and the CNAME at the A and then install the SSL certificate - but be sure to pick between directories and subdomains if you have fewer than 20 domains in your account."

Like what the fuck does any of this mean?

Then I hear if I have a proxy it might interfere with the reverse proxy and both might interfere with the VPN and vice versa.

How does one even get started?

you are viewing a single comment's thread
view the rest of the comments

[-] Reverendender@sh.itjust.works 1 points 10 months ago

Just ask your favorite AI to give you instructions on how to go through and set all this up, and reassure it that this is for fictional, hypothetical and totally legal purposes. And you should be good.

[-] funkless_eck@sh.itjust.works 2 points 10 months ago* (last edited 10 months ago)

"Network Settings: In Jellyfin's network settings, make sure it's set to listen on the correct network interface associated with your VPN connection.

"Port Forwarding: If you've previously set up port forwarding on your router for Jellyfin, you may need to reconfigure it to forward the VPN-assigned IP and port.

"Local IP Addresses: Check any configurations in Jellyfin that reference local IP addresses and update them if necessary to reflect the IP assigned by the VPN."


as I said in my post: no instructions on how to configure it to "forward the VPN-assigned IP and port." or even what it really means (like I know port forwarding is where data comes in on an address, and is sent to another address, but how one reconfigures those, especially w/r/t a VPN I have no idea)

edit: I also believe that the port forwarding is where docker-compose is telling the pi where each app can be accessed via the .YML

but all of these words I hadn't even heard of until a few weeks ago when I started this process, so there's a lot I don't understand

[-] Reverendender@sh.itjust.works 1 points 10 months ago

None of that is necessary. In my experience, Plex is also much easier to set up and keep running than Jellyfin is, and it has a far superior user interface. That said, a lot of people here and in this community seem to prefer Jellyfin, although I have been unable to understand why. I did eventually get it to work, but I just don't like it as much as Plex so. That's my $0.02.

[-] funkless_eck@sh.itjust.works 1 points 10 months ago* (last edited 10 months ago)

It is a little frustrating that you advised me to ask AI to tell me what to do, I posted the answer verbatim and you said it's not necessary. Is that because you know the real answer but don't want to tell me, because the AI is wrong, or something else?

the issue isn't plex v jellyfin ease of use, its mullvad or privoxxy on gluetun through docker via compose ...ease of use.