12
Paralyzed by indecision (lemmy.dbzer0.com)
submitted 8 months ago* (last edited 8 months ago) by Malice@lemmy.dbzer0.com to c/selfhosted@lemmy.world

cross-posted from: https://lemmy.dbzer0.com/post/14381333
(my apologies if cross-posting is frowned upon, just trying to get as much advice as possible! Will remove if it's no good)

Hey, y'all!

Here's the deal:

I have a server I've been running for a couple years, running mostly home automation and NVR stuff (home assistant, node red, frigate, etc). This was my first server and it wasn't set up in the best way possible. On top of that, it's starting to suffer from hardware failure. So I'm replacing it with a retired gaming computer, and I want to do it "right" this time.

So far, I've got it running proxmox with a couple debian VMs (thought process was to have one "primary" one that runs most of everything, and a "network" one that runs network services like nginx, tailscale, etc - I don't know if that separation is actually important or not). I, at some point, want to run pi-hole for sure. I also need a new router, so my thought was to set up opnsense for that. I also want to build a dedicated NAS somewhere down the line, but that's another thread for another time.

I work from home and require stable internet, and I have family that will be very upset if internet is randomly going out from my tinkering with stuff, so I think it's probably best to have totally separate, dedicated hardware for opnsense/pi-hole. I was looking at protectli, but it seems like I'd be looking at at least ~$300 for that option, and I'm not even sure I can run both opnsense and pi-hole on it? I'd also need to get an access point since I'd be replacing my current router that supplies wifi to the house, so I'm looking at like $400 for that transition, which is much more than I'd like to pay for this right now.

I could set everything up without the extra complexity of opnsense/pi-hole and add it down the line, but then I'd be looking at yet another complete re-work of the network and reconfiguring all my automations, cameras, etc., so it feels like it'd definitely be best to just do it up front and get it done. I have access to another old gaming PC I could theoretically set up as a dedicated network box to run opnsense and pi-hole on (after buying a NIC for it), but that seems wildly overkill (it's running an i5 and 32gb RAM, if I remember right), large (full ATX case), and power-hungry for a glorified router. I guess, in this case, I could move my network vm off the "main" server and onto this one, to truly use it as a dedicated network box, running things like opnsense, pi-hole, wireguard/tailscale, nginx, authelia, etc. But then I start getting into the territory of it being too much of a "tinkering" box instead of a stable router that I allow to handle my network and don't screw around with, lol.

So, I seek the advice of you much more experienced homelabbers. I'm terrified to do it "wrong" and wind up having to redo everything over and over, which I know is kind of antithetical to the entire idea of homelabbing in the first place. I need to avoid, as much as possible, unstable internet. In my shoes, what would y'all do? Bite the bullet and go for protectli? Use another old PC for the network box? Just set things up without opnsense/pi-hole for now and go protectli/something else later on and just deal with having to redo everything again?

Thank you so much in advance for any advice!

EDIT: I found a Zotac ZBox CL331 locally for $100 - would that be a good option, do y'all think?

(small aside: if anyone has any advice on moving my entire home assistant instance, node-red, and frigate setups (all separate docker containers) from the old server to the new one, that'd also be greatly appreciated!)

you are viewing a single comment's thread
view the rest of the comments
[-] Decronym@lemmy.decronym.xyz 4 points 8 months ago* (last edited 8 months ago)

Acronyms, initialisms, abbreviations, contractions, and other phrases which expand to something larger, that I've seen in this thread:

Fewer Letters More Letters
ESXi VMWare virtual machine hypervisor
HA Home Assistant automation software
~ High Availability
HTTP Hypertext Transfer Protocol, the Web
NAS Network-Attached Storage
NAT Network Address Translation
PSU Power Supply Unit
SSD Solid State Drive mass storage
VPN Virtual Private Network
VPS Virtual Private Server (opposed to shared hosting)
nginx Popular HTTP server

9 acronyms in this thread; the most compressed thread commented on today has 6 acronyms.

[Thread #512 for this sub, first seen 14th Feb 2024, 21:05] [FAQ] [Full list] [Contact] [Source code]

this post was submitted on 14 Feb 2024
12 points (92.9% liked)

Selfhosted

39677 readers
195 users here now

A place to share alternatives to popular online services that can be self-hosted without giving up privacy or locking you into a service you don't control.

Rules:

  1. Be civil: we're here to support and learn from one another. Insults won't be tolerated. Flame wars are frowned upon.

  2. No spam posting.

  3. Posts have to be centered around self-hosting. There are other communities for discussing hardware or home computing. If it's not obvious why your post topic revolves around selfhosting, please include details to make it clear.

  4. Don't duplicate the full text of your blog or github here. Just post the link for folks to click.

  5. Submission headline should match the article title (don’t cherry-pick information from the title to fit your agenda).

  6. No trolling.

Resources:

Any issues on the community? Report it using the report flag.

Questions? DM the mods!

founded 1 year ago
MODERATORS