369
submitted 8 months ago by L4s@lemmy.world to c/technology@lemmy.world

"A dream. It's perfect": Helium discovery in northern Minnesota may be biggest ever in North America::For a century, the U.S. Government-owned the largest helium reserve in the country, but the biggest exporters now are in Russia, Qatar and Tanzania. With this new discovery, Minnesota could be joining that list.

you are viewing a single comment's thread
view the rest of the comments
[-] Anyolduser@lemmynsfw.com 64 points 8 months ago* (last edited 8 months ago)

The helium used for balloons is of low purity.

The shortages you hear about are of pure or near pure helium. The stuff going into the balloons at Tommy's birthday party isn't the same thing used to cool superconductors.

EDIT: And I used to think Reddit was full of ignorant jackasses ...

[-] ColeSloth@discuss.tchncs.de 28 points 8 months ago* (last edited 8 months ago)

Balloon helium is 3% helium. So every 33 balloons is one Balloon worth of pure helium. No helium starts off pure. It all gets concentrated/separated to get that way. "Balloon grade" helium can be concentrated just fine and considering that thousands of those balloons are filled every day, it is a lot of wasted helium.

*I had my percentage swapped, it seems. Balloon helium is 97% helium.

[-] skillissuer@discuss.tchncs.de 14 points 8 months ago* (last edited 8 months ago)

balloon helium has some air in it, it's still 90%+ helium, probably

[-] ColeSloth@discuss.tchncs.de 8 points 8 months ago

Oh. I had that totally bass akward.

[-] skillissuer@discuss.tchncs.de 4 points 8 months ago

depends on manufacturer, some state it's just 50%

[-] ColeSloth@discuss.tchncs.de 3 points 8 months ago

One of the things I read said it has to be at least 93% to make balloons float.

[-] skillissuer@discuss.tchncs.de 9 points 8 months ago

i've took time to actually look up various manufacturers' datasheets and it's: range 50-99%, 95%, 97%, range 95-100%, 99%, unspecified or just data for pure helium. at this point i'm pretty sure there's no such thing as "balloon gas manufacturer", everyone buys 4N+ cryogenic helium and balloon gas consists of odds and ends that come from flushing piping and empty bottles with better stuff

[-] skillissuer@discuss.tchncs.de 3 points 8 months ago

how much do you need to float, if it's helium then 1L lifts about 1g of mass, if it's 50% helium 50% air it lifts 0.5g per liter, then it depends on how heavy balloon is in relation to its volume

load more comments (1 replies)
load more comments (1 replies)
[-] olympicyes@lemmy.world 12 points 8 months ago

Last time I bought what I thought was a pure balloon of He, I’m pretty sure it had gotten cut with fentanyl.

[-] Tomato666@lemmy.sdf.org 8 points 8 months ago

How high did it get? Asking for errr... science...

[-] 4am@lemm.ee 17 points 8 months ago

What the fuck are you on about? Helium is an element. Doesn’t matter if it’s low purity it’s wasted and then gone. When the high purity stuff is gone we can’t be like “thank god we can purify the low wall quality stuff” when that’s gone too

load more comments (5 replies)
[-] Pulptastic@midwest.social 8 points 8 months ago

Using it for balloons is still a waste because that impure helium could be purified for better uses.

[-] Anyolduser@lemmynsfw.com 16 points 8 months ago

No, no it could not.

The stuff used in balloons isn't pure enough to be used for cryogenic purposes, which is what people really want it for.

And before you ask purifying it is really difficult.

[-] Pulptastic@midwest.social 8 points 8 months ago

Incorrect. It is not found naturally pure, it must be distilled. Balloon helium vs cryogenic helium is like comparing ice distillation vs vapor distillation of liquor. One is cheaper but both are using up a limited resource.

https://en.m.wikipedia.org/wiki/Fractional_distillation

[-] skillissuer@discuss.tchncs.de 3 points 8 months ago

yeah it's distilled off from nitrogen-heavy natural gas, like you could do with nitrogen-heavy gas without helium, or even air. all three processes are done commercially. the issue is that helium bearing natural gas is limited in supply and getting low enough temperature at latter stages of helium refining and liquefying requires bespoke facility. this part is hard

load more comments (6 replies)
[-] ColeSloth@discuss.tchncs.de 7 points 8 months ago

No helium found on earth ever, was pure enough for cryo. Not even close. All helium is found in low concentrations and spun extracted to concentrate and start to purify it. Then there are additional filter methods to finish concentrating it. Removing the hydrogen is about the hardest because it's also abundant and small and light.

But helium used in balloons can absolutely be concentrated and purified.

load more comments (1 replies)
load more comments (2 replies)
[-] skillissuer@discuss.tchncs.de 5 points 8 months ago

wdym by "low purity" helium, helium that has been purified cryogenically is easily 99.999% if not better, and this is the main process used worldwide iirc

[-] Anyolduser@lemmynsfw.com 38 points 8 months ago

The highest grade helium is grade 6, grade 4.7 gets used for cryogenic purposes. Balloon helium is grade 4.

Tommy's dad didn't steal grade 6 helium from a research lab for kid's birthday party.

Here's a link to a gas supplier's website with a chart: https://www.westairgases.com/blog/exploring-the-most-essential-and-underappreciated-uses-for-helium

[-] Signtist@lemm.ee 9 points 8 months ago

I don't know much about Helium, so I'm a bit confused... What's to stop us from purifying grade 4 further into 4.7 and beyond besides cost? If the only thing stopping us is cost, then it's not inaccurate to say that, regardless of grade, the non-renewable element of Helium is being used in frivolous ways because it makes more money to find profitable ways to use the lower-grade helium than to actually further purify and conserve it for more important usage.

[-] Anyolduser@lemmynsfw.com 9 points 8 months ago

So the cost aspect is absolutely massive. You can theoretically filter elemental gold out of sea water, but it's not reasonable to do that to supply gold for use in electronics. Similarly you can purify helium as much as you want but at a certain point the cost makes whatever you were doing with it prohibitively expensive.

Right now we're still pulling helium out of the ground alongside natural gas deposits. We're also not doing everything we can to recover, recycle, or substitute the industrial and scientific grade stuff either.

As less helium gets extracted the cost will go up. This will put market pressure on all users to use it more efficiently or find substitutes wherever possible. If the price goes high enough it might also drive producers to purify helium that might have been sold at a lower grade in the past.

This find in Minnesota pushes that future scenario down the road a bit, which can either extend the status quo or buy time for technological improvements to be made that will make use and extraction more efficient.

[-] Donjuanme@lemmy.world 2 points 8 months ago

So we should wait until scarcity is a problem before we even think about acting?

That's done humanity very well before. Fortunately for the helium industry our previous inaction will likely leave the planet uninhabitable for most life before the helium scarcity demands action.

[-] Anyolduser@lemmynsfw.com 3 points 8 months ago

No, we shouldn't wait.

We will, but we shouldn't.

load more comments (15 replies)
load more comments (21 replies)
this post was submitted on 02 Mar 2024
369 points (97.4% liked)

Technology

59414 readers
1164 users here now

This is a most excellent place for technology news and articles.


Our Rules


  1. Follow the lemmy.world rules.
  2. Only tech related content.
  3. Be excellent to each another!
  4. Mod approved content bots can post up to 10 articles per day.
  5. Threads asking for personal tech support may be deleted.
  6. Politics threads may be removed.
  7. No memes allowed as posts, OK to post as comments.
  8. Only approved bots from the list below, to ask if your bot can be added please contact us.
  9. Check for duplicates before posting, duplicates may be removed

Approved Bots


founded 1 year ago
MODERATORS