39
Optimize power consumption (derpzilla.net)
submitted 8 months ago* (last edited 8 months ago) by Kwa@derpzilla.net to c/selfhosted@lemmy.world
55 comments fedilink hide all child comments

So I have finally built my NAS. I used an N100 CPU because I saw it has low power consumption.

Right now I have 2 NVMe SSDs and 2 HDDs. I have installed proxmox on the 2 SSDs as RAID1. I have not partitioned the HDDs yet, they are just plugged in and powered on.

Just booting into proxmox, without any VMs or containers running, I am pulling 45W from the wall. This looks super high to me, and I’m afraid that starting to use the HDDs and running some VMs may double this…

I don’t have much references, but I have an Odroid with an external self-powered HDD, it is using 5W. I have a raspberry pi 4 with an external HDD, the raspberry is pulling 3W and the HDD 3W.

With these data, I was thinking I wouldn’t go over 20W. 45W is enormous and not something I can run 24/7, kind of a fail for a NAS…

Have I done something wrong or is it just how much it’s supposed to pull?

Edit: I have come across powertop. Using the auto tune, I was able to drop to 33-35W. I have unplugged the HDDs and dropped to 22W. I guess I cannot go lower, this may be because of the PSU or the 2 NVMe

you are viewing a single comment's thread
view the rest of the comments
[-] paf@jlai.lu 5 points 8 months ago

Do also have a n100 processor running proxmox with 3 VM. Can't try right now but can come back in a few days to let you know how much power it draws

[-] Kwa@derpzilla.net 1 points 8 months ago

Thanks that would be cool. Also if you can tell me if this is a NUC or something larger.

[-] DreadPotato@sopuli.xyz 4 points 8 months ago* (last edited 8 months ago)

I'm not the other user, but this is my NUC running proxmox with 2 VMs and 2 LXCs. Running with an old i3, 16gb ram and a single 1tb NVME, no mechanical HDDs, and a few USB peripherals like a ZigBee dongle.

[-] BearOfaTime@lemm.ee 1 points 8 months ago

Wow, 7 watts. Nuts!

What IS that thing?

[-] paf@jlai.lu 2 points 8 months ago

So pc is consuming 13W, this is with one nvme + one SSD, pic at 30w for a few seconds at boot.

[-] Kwa@derpzilla.net 1 points 8 months ago

Thanks for reporting!

[-] whereisk@lemmy.world 2 points 8 months ago

I'm running a n100 16gb with a 256ssd, 4vms and 4 docker images, it's pulling 7-9w.

[-] Kwa@derpzilla.net 2 points 8 months ago

Thanks, this is really efficient. I now have good hopes that changing my PSU should bring me closer to this

[-] whereisk@lemmy.world 2 points 8 months ago

It's literally one of those little known brand nuc, tiny box - beelink I think. Total cost $200 or so - it's been running non stop for the last 3 months without an issue. I don't think it even has a fan in there.

[-] paf@jlai.lu 1 points 8 months ago

Curious, might have same machine but do consume a bit more, do you have one SSD + one nvme?

[-] whereisk@lemmy.world 2 points 8 months ago* (last edited 8 months ago)

Sorry, I must have been too tired, got nearly all details wrong: 32GB RAM 1TB M.2, USB3.2, BT4.2,WiFi 5,4k HDMI, Gigabit Port, and not a Beelink but a DreamQuest. There's just the M2 interface disk connected, no SSD.

[-] possiblylinux127@lemmy.zip 2 points 8 months ago* (last edited 8 months ago)

You still won't see that low of power consumption when you have something custom built.

With that being said you have a lot of room for improvement

this post was submitted on 15 Mar 2024
39 points (100.0% liked)

Selfhosted

40359 readers
213 users here now

A place to share alternatives to popular online services that can be self-hosted without giving up privacy or locking you into a service you don't control.

Rules:

  1. Be civil: we're here to support and learn from one another. Insults won't be tolerated. Flame wars are frowned upon.

  2. No spam posting.

  3. Posts have to be centered around self-hosting. There are other communities for discussing hardware or home computing. If it's not obvious why your post topic revolves around selfhosting, please include details to make it clear.

  4. Don't duplicate the full text of your blog or github here. Just post the link for folks to click.

  5. Submission headline should match the article title (don’t cherry-pick information from the title to fit your agenda).

  6. No trolling.

Resources:

Any issues on the community? Report it using the report flag.

Questions? DM the mods!

founded 1 year ago
MODERATORS
ruud@lemmy.world
Loki@lemmy.world
CannaVet@lemmy.world
devve@lemmy.world
HybridSarcasm@lemmy.world
HybridSarcasm@lemmy.hybridsarcasm.xyz